For Multipoint Videoconferences
To connect:
1 Select "Multipoint" for "Line I/F".
2 Enter the telephone number(s) of a remote party into the box(es) (When
using a LAN, enter an IP address or a DNS name.)
3 Set the communication attributes.
4 Click the [DIAL] button.
5 The message, "Now dialing..." appears.
6 After the connection is made, the message, "Connect OK." will appear, and
the screen will return to the "Dial/Disconnect" page.
To disconnect (all remote parties at once):
1 Click the [DISCONNECT] button.
2 The message "Now disconnecting..." appears.
3 After the disconnection is complete, the message, "Disconnect OK." will
appear, and the screen will return to the "Dial/Disconnect" page.
To disconnect (one party at a time):
1 Click the button, (Disconnect A to E) that corresponds to the party you
wish to disconnect.
2 The message "Now disconnecting..." appears.
3 After the disconnection is complete, the message, "Disconnect OK." will
appear, and the screen will return to the "Dial/Disconnect" page.
To clear the dial number:
1 Click the [CLEAR] button.
2 The number(s) entered on this menu will be cleared and the screen will
return to the "Dial/Disconnect" page.
How to use "Dial/Disconnect"
257