Sending Motion Pictures As Still Images; Sending Still Images Using The Still Image Menu - Sony IPELA PCS-G70 Operating Instructions Manual

Sending Motion Pictures as Still Images

You can send motion pictures shot by the Camera or those output from the
connected external equipment as still images.
When you are sending pictures that contain lots of text, it is recommended that
you send them as still images.
Notes
• You can only transmit still images when video is set to Input 1 (main camera, IR 1, or
AUX1).
• Still images cannot be transmitted during transmission or reception in dual video or
split transmission.
For details, see "Conducting a Videoconference Using the Dual Video
Function" on page 128.

Sending Still Images Using the Still Image Menu

While in communication with the remote party, you can send motion pictures
shot by the local camera as still images. You can send one still image or still
images continuously.
1
Open the Still Image menu.
Press the MENU button on the Remote Commander to display the Setup menu,
and select the
2
Use the V, v, B or b button on the Remote Commander to select "Send"
or "Continuous Send", then press the PUSH ENTER button.
3
Adjust the camera angle and zoom and press the PUSH ENTER button, if necessary.
For details on the adjustments of the camera angle and zoom, see
"Adjusting the Camera Angle and Zoom" on page 111.
The motion picture displayed on the local monitor screen freezes, and a still picture
will be sent to the remote party. If you select "Send", a still image is sent. When
transmission is finished, the message "The still image has been sent." appears.
When "Continuous Send" is selected, still images are sent continuously. The
sending interval depends on the transmission rate and the image type.
138
Sending Motion Pictures as Still Images
(still image) icon with the V or v button.