Rack Flange Kit For Synthesizers With Handles; Rack Flange Kit For Synthesizers With Handles Attached Contents - HP 8360 User Handbook Manual

Rack Flange Kit for
Synthesizers with
Handles Attached
(Option 913)
CAUTION
Option 913 synthesizers are supplied with rack flanges and the
necessary hardware to install them on the synthesizer without
removing the instrument handles. The following table itemizes the
parts in this kit.
Rack Flange Kit for Synthesizers with Handles Attached
Ventilation Requirements:
cabinet, the convection into and out of the instrument must not be
restricted. The ambient temperature (outside the cabinet) must be
less than the maximum operating temperature of the instrument
by 4 "C for every 100 watts dissipated in the cabinet. If the total
power dissipated in the cabinet is greater than 800 watts, then forced
convection must be used.
Table 3-5.
Contents
When installing the instrument in a
INSTALLATION 3-15