Monitor Menu - HP 8360 User Handbook Manual

Function Group
Menu Map
Description
Programming Codes
See Also

Monitor Menu

Function Group (MOD)
Menu Map 4
Description
POWER and FREQUENCY
2 and 5
This command causes the synthesizer to examine only the rear
panel source module interface connector to determine the type
of source module (if any) connected. The instrument frequency
limits and multiplier are altered according to the source module
connected. However, the leveling point is not changed. See
Leveling Point Module to set the synthesizer to level at the
output of the source module.
An asterisk next to the key label indicates this feature is active.
SYSTem:MMHead:SELect FRONt(REARINONE
SYSTem:MMHead:SELect?
Analyzer:
NONE
Module Menu
This softkey (Option 002 only) accesses the menu which allows you
to output internally-generated AM and FM waveforms to the rear
panel AM/FM OUTPUT connector. It also accesses the softkeys
which allow you to display the AM depth and FM deviation of the
modulation waveforms.
Outputs the AM waveform to the AM/FM
OUTPUT connector.
FM
Outputs the FM waveform to the AM/FM
OUTPUT connector.
Displays the AM depth of the modulating
Meter On/Off AM
signal.
HP 8360
User's Handbook