Description Of Triggering In The Hp 8360 Series Synthesizers; The Trig Trigger Configuration; L-42. Hp 8360 Simplified Trigger Model - HP 8360 User Handbook Manual

E X T >-
B U S +
IMMED O-
Description of
Triggering in the HP
8360 Series
Synthesizers
Initiate
TRIG
Event Detection
Sequence
Figure 1-41. The TRIG Trigger Configuration
The HP 8360 series synthesizers follow the SCPI model of triggering.
It is a layered model with the structure shown in Figure l-42.
P e r f o r m a S w e e p
(Frequency, Power,
Stepped, List, or Analog)
Figure l-42. HP 8360 Simplified Trigger Model
The process of sweeping involves all 3 of these states. The IDLE
state is where the sweep begins. The IDLE state is left when
Actions
EXT
I d l e S t a t e
Sweep Initiated
Waiting for the
Trigger Signal
t o b e T r u e
Sweep Started
Sweep State
Getting Started Programming l-l11
I