HP 8360 User Handbook Manual page 365

Programming Codes
See Also
Step Dwell
Function Group
Menu Map 2
Description
Programming Codes
See Also
Step Point3
Function Group
HP 8360
User's Handbook
SWEep:CONTrol:STATe ON]OFF]l]O
SWEep:CONTrol:TYPE SLAVe
Analyzer: NONE
Step Control Master, Step Swp
FREQUENCY
This softkey lets you set dwell times for points in the stepped
frequency mode of sweep operation. The dwell time for points in step
frequency sweep may range from 100 pus to 3.2s. The actual time
between points is the sum of dwell and phase lock times.
Select Step Dwell , then use the entry area to enter the desired
value.
SWEep[:FREQ uency]:DWELl <num>[time suffix] or
SCPI:
Analyzer: NONE
Step Swp Menu, Sweep
FREQUENCY
Menu
Mode Step
Operating and Programming Reference S-67
Step Points