HP 8360 User Handbook Manual page 346

command to set the switch will cause ROSC:SOUR:AUTO OFF to
be done also. The *RST value is automatically determined.
l ROSCillator:SOURce:AUTO ONlOFFlllO
Sets and queries the automatic reference selection switch.
The *RST value is 1.
STATus:OPERation:CONDition?
l
Queries the Standard Operation Condition register.
STATus:OPERation:ENABle <mua>
l
STATus:OPERation:ENABle?
l
Sets and queries the Standard Operation Enable register.
The STATus:PRESet value is 0.
l
Queries the Standard Operation Event Register. This is a destructive
read.
STATus:OPERation:NTRansition Cnum>
l
STATus:OPERation:NTRansition?
l
Sets and queries the Standard Operation Negative Transition Filter.
The STATus:PRESet value is 0.
STATus:OPERation:PTRansition <rum>
l
STATus:OPERation:PTRansition?
l
Sets and queries the Standard Operation Positive Transition Filter.
After STATus:PRESet, all used bits are set, to 1's.
STATUS:PRESet
l
This command presets the following enable and transition registers:
MSIB, OPERation, QUEStionable, and SRECeiver.
Is set to all 0s.
Is set to all 0s.
All bits used are set to 1s. Unused bits remain OS.
STATus:QUEStionable:CONDition?
l
Queries the Data Questionable Condition Register.
STATus:QUEStionable:ENABle <mm>
l
STATus:QUEStionable:ENABle?
l
Sets and queries the Data Questionable SRQ Enable register.
The STATus:PRESet value is 0.
HP 8360
User's Handbook