System Requirements; Features - D-Link GO-DSL-N150 User Manual

1.3 System Requirements

Recommended system requirements are as follows:

A 10/100 base-T Ethernet card is installed on your PC

A hub or Switch. (connected to several PCs through one of Ethernet
interfaces on the device)

Operating system: Windows 98 SE, Windows 2000, Windows ME,
Windows XP, Windows Vista, Windows 7

Internet Explorer V5.0 or higher, Netscape V4.0 or higher, or Firefox 1.5 or
higher

1.4 Features

The device supports the following features:

Various line modes

External PPPoE dial-up access

Internal PPPoE/PPPoA dial-up access

1483Bridged/1483Routed with dynamic ip or static ip

Multiple PVCs (the number of PVCs support is eight)

DHCP server/relay

Static route

Network Address Translation(NAT)

DMZ

Virtual Server

Universal plug and play (UPnP)

Dynamic Domain Name Server(DDNS)

One-level password and username

Network Time Protocol(NTP)

Firmware upgrading through Web, TFTP, or FTP

Resetting to the factory defaults through Reset button or Web

Diagnostic test

Web interface

Telnet CLI

IP/MAC/URL Filter

Application layer service

QOS

Port binding
GO-DSL-N150
4
User Manual