D-Link GO-DSL-N150 User Manual page 61

User Manual
GO-DSL-N150
DHCP Server IP for relay agent: The DHCP server IP Address runs on WAN
side.
LAN :: DNS Server
The DNS Configuration allows the user to set the configuration of DNS
DNS Relay selection If user want to disable this feature, he just need to set both
Primary and secondary DNS IP to 0.0.0.0.Using DNS relay, users can setup DNS
server IP to 192.168.1.1 on their Computer. If not, device will perform as no DNS
relay.
Wireless LAN settings
SSID: The SSID is a unique name to identify the ADSL Router in the wireless
LAN. Wireless clients associating to the ADSL Router must have the same SSID.
Broadcast SSID: Select No to hide the SSID such that a station can not obtain
the SSID through passive scanning. Select Yes to make the SSID visible so a
station can obtain the SSID through passive scanning.
Channel ID: The range of radio frequencies used by IEEE 802.11b/g wireless
devices is called a channel.
Wireless LAN :: WEP
WEP (Wired Equivalent Privacy) encrypts data frames before transmitting over
the wireless network. Select Disable to allow all wireless computers to
communicate with the access points without any data encryption. Select 64-bit
WEP or 128-bit WEP to use data encryption.
Key#1~Key#4: The WEP keys are used to encrypt data. Both the ADSL Router
and the wireless clients must use the same WEP key for data transmission.If you
chose 64-bit WEP, then enter any 10 hexadecimal digits ("0-9", "A-F") preceded
by 0x for each key (1-4). If you chose 128-bit WEP, then enter 26 hexadecimal
digits ("0-9", "AF") preceded by 0x for each key (1-4).The values must be set up
exactly the same on the Access Points as they are on the wireless client stations.
The same value must be assigned to Key 1 on both the access point (your ADSL
Router) and the client adapters, the same value must be assigned to Key 2 on
both the access point and the client stations and so on, for all four WEP keys.
Wireless LAN :: WPA-PSK
58