Introduction; Safety Precautions - D-Link GO-DSL-N150 User Manual

1

Introduction

The GO-DSL-N150 device is an ADSL access device that supports multiple line
modes. With four 10/100Base-T Ethernet interfaces at the user end, it provides
high-speed ADSL broadband connection to the Internet or Intranet for high-end
users such as net cafes and office users. The device provides high performance
access to the Internet with a downlink of 24 Mbps and an uplink of 1 Mbps.
As a WLAN AP or WLAN router, the device supports WLAN access to the
Internet. It complies with the IEEE 802.11b/g/n specifications, WEP, WPA and
WPA2 security specifications.

1.1 Safety Precautions

Take the following instructions to prevent the device from risks and damage
caused by fire or electric power:

Use the type of power marked by the volume label.

Use the power adapter packed in the device package.

Pay attention to the power load of the outlet or prolonged lines. An
overburden power outlet or damaged lines and plugs may cause electric
shock or fire accident. Check the power cords regularly. If you find any
damage, replace it at once.

Proper space left for heat dissipation is necessary to avoid damage
caused by overheating to the device. The long and thin holes on the device
are designed for heat dissipation to ensure that the device works normally.
Do not cover these heat dissipation holes.

Do not put this device close to a place where a heat source exists or high
temperature occurs. Avoid the device from direct sunshine.

Do not put this device close to a place where it is overdamp or watery. Do
not spill any fluid on this device.

Do not connect this device to any PCs or electronic products, unless our
customer engineer or your broadband provider instructs you to do this,
because any wrong connection may cause power or fire risk.

Do not place this device on an unstable surface or support.
GO-DSL-N150
1
User Manual