Enable Ldap; Remove Ldap Certificate; Remove Ldap Group - HP Integrity Superdome 2 16-socket User Manual

ENABLE LDAP

NOTE: If LDAP is enabled, local accounts are disabled, and the LDAP server becomes unavailable,
you can recover by booting into Lost Password mode.
When booting in Lost Password mode, the local Administrator password will be reset, LDAP is
disabled, and Local Logins are re-enabled.
Command:
ENABLE LDAP [NOLOCAL]
Description:
Enables directory authentication. If you use the NOLOCAL option, local users are not enabled.
Access level/Bay level:
OA Administrator
Restrictions:
To enable LDAP, you must first complete the configuration.

REMOVE LDAP CERTIFICATE

Command:
REMOVE LDAP CERTIFICATE "<certificate name>"
Description:
◦
Removes the trust certificate corresponding to the MD5 <certificate name>.
◦
This command revokes trust in the LDAP server associated with the certificate.
Access level/Bay level:
OA Administrator
Restrictions:
None

REMOVE LDAP GROUP

Command:
REMOVE LDAP GROUP {ALL | "<group name>"}
Description:
Removes the LDAP group from the system. If you specify ALL, then all LDAP groups are removed
from the system.
Access level/Bay level:
OA Administrator
Restrictions:
To enable LDAP, you must first complete the configuration.
36 Directory commands