27 Firmware update commands
For information on online firmware update using the OA GUI, see the HP Integrity Superdome 2
Onboard Administrator User Guide.
UPDATE SHOW
Command:
UPDATE SHOW { ALL | BLADE [ ALL | <location> [ { , | - } <location>
] ] | CONFIG | FAN [ ALL | <location> [ { , | - } <location> ] ] |
FIRMWARE | ICBAY [ ALL | <location> [ { , | - } <location> ] ] |
LCD | NPARTITION { nPartition name or number | ALL } | TRAY }
Description:
This command will display the firmware version installed on the following FRUs in the enclosure
on which the command is run:
◦
Non-Superdome-blade devices in device bays
◦
Interconnect modules
◦
Fans
◦
Trays (PIC on OA tray)
◦
PIC on GPSM boards
◦
LCDs
The firmware version of the following FRUs will not be displayed using the update show
command.
◦
Superdome 2 blades
◦
XFM
◦
IOX
◦
OA
◦
GPSM
Access level/Bay level:
Any
Restrictions:
This command must be run on the enclosure containing the component.
Example:
Oa_host_name> update show
Device
Name
-----------------------------------------------------------------------------------
TRAY
| BladeSystem c7000 Onboard Administrator Tray
GPSMPWR | GPSM power management device
GPSMPWR | GPSM power management device
LCD
| BladeSystem c7000 Insight Display
BLADE
| HP StorageWorks SB40c
ICBAY
| GbE2c Ethernet Blade Switch
ICBAY
| GbE2c Ethernet Blade Switch
FAN
| BladeSystem c-Class fan
FAN
| BladeSystem c-Class fan
170 Firmware update commands
Location Version
NewVersion
| -
| 1.2.0
| 1.2.0
| 1
| 1.2.0
| 1.2.0
| 2
| 1.2.0
| 1.2.0
| -
| 2.2.2
| 2.2.2
| 4
| 1.20.0
| 1.20.0
| 1
| 1.02.0
| 1.02.0
| 2
| 1.02.0
| 1.02.0
| 1
| 2.7.4
| 2.7.4
| 2
| 2.7.4
| 2.7.4