Rack Commands; Set Rack Name; Show Rack Name; Show Topology - HP Integrity Superdome 2 16-socket User Manual

4 Rack commands

SET RACK NAME

Command:
SET RACK NAME <rack name>
Description:
Sets the rack name
Access level/Bay level:
OA Administrator, OA Operator
Restrictions:
The <rack name> must be a maximum of 32 characters long and includes all alphanumeric,
the dash, and the underscore characters.
UnnamedRack is the default rack name.

SHOW RACK NAME

Command:
SHOW RACK NAME
Description:
Displays the user-defined rack name setting for the enclosure
Access level/Bay level:
All
Restrictions:
None
Example:
OA-0018FE27577F> SHOW RACK NAME
Rack Name: UnnamedRack

SHOW TOPOLOGY

Command:
SHOW TOPOLOGY
Description:
◦
Displays the complexes connected by the complex link
◦
Displays the enclosures connected by the enclosure link in each complex
◦
Displays a table with the enclosure name, overall health of the enclosure, and the IP
address by complex
Access level/Bay level
OA Administrator, OA Operator, OA user
SET RACK NAME 19