oa-host-name> clear archive
This command will erase ALL files from the Archive Storage.
Entering anything other than 'YES' will result in the command not executing.
Are you sure you want to proceed? yes
The files above have been successfully removed from the Archive Storage.
COPY
Command:
COPY <url_source> { <url_target> | ARCHIVE <"filename"> | USB <"filename"> }
Description:
Copies a config, parconfig, debug log, or firmware bundle file from the specified source to
the specified destination. Valid sources and destinations are:
◦
Archive Storage
◦
The external USB
◦
The network using http, ftp or tftp protocols.
A copy request between two remote URLs, or using http protocol at the destination file is not
permitted.
Access level/Bay level:
OA Administrator
Restrictions:
None
Example:
oa-host-name> copy ftp://server/hpsd2fw.bundle archive
The file was successfully copied.
oa-host-name > copy archive://hpsd2fw.bundle usb
The file was successfully copied.
oa-host-name > copy archive://storage/config.cfg ftp://server/config.cfg
The file was successfully copied.
oa-host-name > copy archive://storage/debug.log tftp://server/debug.log
The file was successfully copied.
DOWNLOAD PARCONFIG
Command:
DOWNLOAD PARCONFIG { ARCHIVE <file> | USB <file> | <URL> }
Description:
Downloads a previously saved partition specification file from an archive, specific IP host, or
USB connected to the enclosure.
Supported protocols are:
◦
http
◦
ftp
◦
tftp
◦
usb
◦
Archive Storage
186 Archive Storage commands