Toshiba e-STUDIO453 Service Manual page 179

(6) Disconnect 1 connector, remove 1 screw
and take off the SFB board.
(A-4) Bypass pickup solenoid
(1) Take off the bypass unit (
(2) Remove 1 screw and slide the bypass feed
upper cover to take it off.
(3) Remove 4 screws and take off the upper
plate.
(4) Disconnect 1 connector, remove 1 spring
and take off the bypass pickup solenoid with
the solenoid arm.
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Chapter 9.4 (A-1)).
Spring
9 - 13
Fig. 9-413
Bypass feed upper cover
Screw
Fig. 9-414
Screw
Upper plate
Fig. 9-415
Solenoid arm
Fig. 9-416
e-STUDIO350/352/353/450/452/453
PAPER FEEDING SYSTEM
Screw
SFB board
Bypass pickup
solenoid
9