Toshiba e-STUDIO453 Service Manual page 145

[M] SLG board
(1) Take off the lens cover ( Chapter 6.7 [B]).
(2) Disconnect 8 connectors from the SLG
board.
(3) Remove 6 screws and take off the SLG
board.
Note:
The SLG board for e-STUDIO350/450 and
the one for e-STUDIO352/353/452/453 are
different. To avoid confusion, the color of
the connector CN19 on the SLG board for
e-STUDIO352/353/452/453 is yellow.
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Fig. 6-725
6 - 23 e-STUDIO350/352/353/450/452/453
07/11
6
SCANNER