Enter The Menu During Fire Alarm - Panasonic MEW01349 Operating Instructions Manual

Panasonic Electric Works Nordic AB
MEW01349 Rev: -
15.2.1
Operating Instructions Fire alarm system EBL512 G3, V1.1.x
The printer (if available) will print each fire alarm, e.g.:
** Fire Alarm **
Zone 002 Address 03
SMOKE
YYYY-MM-DD hh:mm
User definable alarm text
(if progr.)
Reset of the fire alarms, see chapter "Alarm reset", page 49.

Enter the menu during fire alarm

By pressing the soft key "
access to the menu system (see Access, page 85). NOTE! Access
code is required. In this case a part of the display's alarm window will
be temporarily suppressed to permit the display of the menu system.
First alarm: 002-03
Latest alarm: 003-11
menu
H1 Perform monthly test
H2 Disable or re-enable
H3 Set calendar and clock
H4 Present system
H5 Service
H6 FAULT acknowledge
H7 Perform zone test (Test mode)
H8 Maintenance
H9 Interlocking outputs and inputs
H10 Change access code for daily duties
Esc menu
The normal alarm window will be automatically displayed again after
the menu system is escaped or 5 minutes after the latest manoeuvre in
the menu system.
The alarm window will also be automatically displayed again if any of
the soft keys "
Esc menu
"Alarms queued" (P8).
42
" (P4) during fire alarm, you will get
Menu
" (P4) or " " is pressed or push button
ESC
4 zones in alarm