Reset Interlocking Output (H9/C3) - Panasonic MEW01349 Operating Instructions Manual

Panasonic Electric Works Nordic AB
MEW01349
32.3
Action
"Menu"
Scroll to menu H9.
"↲ "
Scroll to menu C3.
"↲ "
"↲ " (reset)
alt.
"ESC"
Rev: - Operating Instructions Fire alarm system EBL512 G3, V1.1.x

Reset interlocking output (H9/C3)

All activated interlocking outputs are listed in this menu.
- If the interlocking output is activated via its programmed control
expression and with latching output selected (in WinG3), the output
has to be reset via this menu.
- If the interlocking output is activated via its programmed control
expression and with latching output not selected, the output can be
reset via this menu.
- If the interlocking output is activated via menu H9/C2, the output
has to be reset via this menu.
Text in display
H9 Interlocking outputs and inputs
C1 Activated interlocking outputs / inputs
C2 Activate interlocking output
C3 Reset interlocking output
C4 Disable interlocking output
C5 Re-enable interlocking output
C3 Reset interlocking output
Reset interlocking output
area 001 point 10
area 001 point 11
area 001 point 12
...
Escape
menu Reset All
C3 Reset interlocking output
147
Comments
According to chapter
"Access", see page 85.
Menu C3 is a list in which
you can scroll. If there are
no activated outputs, menu
C3 will not open.
↲
Press " " to reset the
selected output.
Press "Reset All" to reset
all interlocking outputs.
Press "ESC" to menu C3.
Scroll to another menu or
press "ESC".