Defining Dscp And Cos Settings; Configuring Dscp Priorities - D-Link DWC-1000 User Manual

Advanced Configuration Settings

Defining DSCP and CoS Settings

After you enable QoS mode, use the procedures in the following sections to configure the
values and priorities used by DSCP and CoS.

Configuring DSCP Priorities

Path: SETUP > QoS > LAN QoS > IP DSCP Configuration
If you selected DSCP for your QoS configuration, use the following procedure to configure
and assign priority to the DSCP fields in IP packets.
1. Click SETUP > QoS > LAN QoS > IP DSCP Configuration. The PORT DSCP MAPPING
page appears. Each row corresponds to a DSCP field in an IP packet.
52
DWC-1000 Wireless Controller User's Guide