D-Link DWC-1000 User Manual page 157

Table 7-20. Fields on the AP RF SCAN STATUS Page
Field
MAC Address
SSID
Physical Mode
Channel
Status
Age
Viewing Status and Statistics
Ethernet MAC address of the detected access point. This could be a physical radio interface or
VAP MAC.
Service Set ID of the network, which is broadcast in the detected beacon frame.
802.11 mode used on the access point.
Transmit channel of the access point.
Managed status of the access point. The valid values are:
Managed = neighbor access point is managed by the wireless system.
•
Standalone = access point is managed in standalone mode and configured as a valid AP entry
•
(local or RADIUS).
Rogue = access point is classified as a threat by one of the threat detection algorithms.
•
Unknown = access point is detected in the network but is not classified as a threat by the
•
threat detection algorithms.
Time since this access point was last detected in an RF scan. Status entries for this page are
collected at a point in time and eventually age out. The age value for each entry shows how long
ago the wireless controller recorded the entry.
157
DWC-1000 Wireless Controller User's Guide
Description