D-Link DWC-1000 User Manual page 115

Path: SETUP > VPN Settings > PPTP > PPTP Server
After you configure the PPTP clients for the PPTP VPN, use the following procedure to
configure the PPTP server. Once enabled, a PPTP server is available on the wireless
controller for LAN and Option PPTP client users to access. PPTP clients within range of
configured IP addresses of allowed clients can reach the wireless controller's PPTP server.
After they are authenticated by the PPTP server (the tunnel endpoint), PPTP clients have
access to the network managed by the wireless controller.
To configure PPTP clients:
1. Click SETUP > VPN Settings > PPTP > PPTP Server. The PPTP SERVER page
appears.
2. Complete the fields in the page (see Table 6-5).
3. Click Save Settings.
VPN Settings
115
DWC-1000 Wireless Controller User's Guide