Installation Options - HP D6030A - NetServer - E50 Installation Manual

Chapter 1

Installation Options

WARNING Before removing the cover, always disconnect the power cord
and unplug telephone cables. Disconnect the power cord to
avoid exposure to high energy levels that may cause burns
when parts are short-circuited by metal objects such as tools
or jewelry. Disconnect telephone cables to avoid exposure to
shock hazard from telephone ringing voltages.
WARNING
The following upgrades (PCI boards, memory DIMMs, and
hard disk drives) require removing the cover from the HP
NetServer E 200. BE SURE to disconnect power from the
NetServer before opening it. BE SURE to observe appropriate
ESD precautions when handling electronic components.
If Installing
Accessories, remove
Cover
Add Hard Disk Drives
2
Setting Up the HP NetServer
Refer to Chapter 3, "Opening and Closing the HP
NetServer."
For details refer to Chapter 4, "Installing Mass
Storage Devices."
The HP NetServer can use IDE and SCSI hard disk
drives, depending on the model.