Chapter 2
Power
Keyboard
Mouse
USB
Not Used
Serial Port A
Parallel Port
Serial Port B
External SCSI
Port
Applying Power to the HP NetServer
Powering-Up the HP NetServer
The HP NetServer E 200 powers up and loads the operating system when you
press the power button on the front panel. This runs a set of Power On Self Tests
(POST) during this process. For details refer to Chapter 9, "Troubleshooting."
NOTE
Turn on power to the monitor connected to the HP NetServer
before you power-on the NetServer. This allows proper
auto-configuration of video output of the NetServer as the
system boots up.
Figure 2-3. Rear Panel and Ports
Controls, Ports, and Indicators
Strain
Relief
Key Lock
Video
SVGA
9