Removing An Accessory Board - HP D5970A - NetServer - LCII User Manual

Chapter 5
Guide Pin
Figure 5-6. Replacing the PCI Card Cage
10. Replace the top cover on the HP Netserver and push the Netserver back into
the rack.
Once the HP Netserver is returned to normal operation, you may need to
install software drivers.
The drivers for the new PCI board are either part of your existing system
software or included on a flexible diskette or CD-ROM provided with the
accessory board.

Removing an Accessory Board

Follow the steps in the preceding section "Installing an Accessory Board," but
instead of installing a card, remove the PCI card and replace the slot cover.
Installing Additional Boards
47