Removing The Accessory Board - HP D5970A - NetServer - LCII Guía Del Usuario

Chapter 5
16. Once the Netserver is returned to normal operation, you may need to install
software drivers.
The drivers for the new PCI board are either part of your existing system
software or included on a flexible diskette or CD-ROM provided with the
accessory board.
Latch
Step B
Insert
between tabs
Step A
Open Clamp

Removing the Accessory Board

Follow the same steps as the installation procedure, but in reverse order. Replace the slot
cover. See the preceding sections for details.
Step C
Lower Board
Tab Rest
Figure 5-6. Clamping Long PCI Boards
Installing Additional Boards
Step D
Close Clamp
Board
Clamp
43