Rack Mounting The Hp Netserver (4-Post); Introduction - HP D5970A - NetServer - LCII User Manual

7 Rack Mounting the HP Netserver
(4-Post)

Introduction

This chapter provides instructions for mounting the HP Netserver in 4-post HP
System/E or System/U racks (shown in Figure 7-1) and third-party non-threaded
4-post racks. If you have the older 4-post HP Systems rack, see Chapter 13,
"Alternative Rack Mounting (4-Post)," for instructions. If you have a 2-post
non-HP rack, see Chapter 8, "Rack Mounting the HP Netserver (2-Post)," or refer
to the documentation in the appropriate rack accessory kit. If you want to install
the HP Netserver in a third-party rack not covered in this guide, you may find
relevant documentation on HP's web site at the following URL:
http://www.hp.com/netserver/support
61