Sony MHC-GN1300DA Operating Instructions Manual page 40

Note
If you play back a large data size of MP3 audio
files and JPEG image files at the same time, the
sound may skip. It is recommended that you
reduce the data size by creating the MP3 audio
files with a bit rate of 128 kbps or lower. If the
skipping sound still occurs, reduce the data size
of JPEG image files by creating the JPEG image
files in smaller size or lower resolution.
Specifying the slide show speed
(JPEG image files only)
1
Press
the Control Menu for JPEG image
files appears on the TV screen.
2
V
Press
ENTER.
The options for "INTERVAL" appear
on the TV screen.
3 V
Press
the transition interval you want.
The intervals become longer in the
order from "FAST", "NORMAL"
(default setting), "SLOW 1" to
"SLOW 2".
4
Press ENTER.
The selected setting takes effect.
Note
Some JPEG image files (especially progressive
JPEG image files or JPEG image files with
3,000,000 pixels or more) may take a longer
time to display than others, which may make the
transitions seem longer than the option you
selected.
GB
40
DISPLAY repeatedly until
v
or repeatedly to select
(INTERVAL), then press
v
or repeatedly to select
Selecting a transition effect for
image files in the slide show
(JPEG image files only)
1
Press DISPLAY repeatedly until
the Control Menu for JPEG image
files appears on the TV screen.
2 V v
Press or repeatedly to select
(EFFECT), then press
ENTER.
The options for "EFFECT" appear on
the TV screen.
3 V v
Press or repeatedly to select
the setting you want.
The default setting is underlined.
• MODE 1: the image sweeps in from
top to bottom of the screen.
• MODE 2: the image sweeps in from
left to right of the screen.
• MODE 3: the image stretches out
from the center of the screen.
• MODE 4: the image randomly cycles
through the effects.
• MODE 5: the next image slides over
the current image.
• OFF: turns off this function.
4
Press ENTER.
The selected setting takes effect.