Table of Contents
Advertisement
Fitting the FlexiClip telescopic
runners
Risk of injury caused by hot
surfaces.
The oven gets hot during operation.
You could burn yourself on the
heating elements, the oven
compartment, or accessories.
Allow the heating elements, oven
compartment and the accessories to
cool down before fitting or removing
the FlexiClip telescopic runners.
Preferably fit the FlexiClip telescopic
runners onto level 1. You can then use
them for food which should be cooked
on level 2.
Each level of the shelf runners consists
of two rails. The FlexiClip telescopic
runners are fitted on the upper rail of
the two rails that make up a shelf level.
The FlexiClip telescopic runner with the
Miele logo is fitted on the right.
When fitting or removing the FlexiClip
telescopic runners, do not extend
them.
Hook the FlexiClip telescopic runner
onto the front of the top rail of a shelf
runner (1.).
Then hold the FlexiClip telescopic
runner at an angle in towards the
middle of the oven compartment (2.).
Slide the FlexiClip telescopic runner
at an angle along the top rail as far as
it will go (3.).
Then swing the FlexiClip telescopic
runner back to the side and secure it
to the top rail with an audible click
(4.).
If the FlexiClip telescopic runners are
difficult to pull out after fitting, you
may need to pull firmly on them once
to release them.
Features
23
Advertisement
Table of Contents
