INSTALLATION & MAINTENANCE MANUAL
Terminal for Wired Remote Controller and Thermostat
Terminal for Power supply
Earth connection
6.2.2 Wiring Connection
(1) Remove fixing screws and open the Zone Interface Box cover as shown in the figure below.
Connect it with
crimping terminal
Standard wire
Figure 6.1 Shape of Single Wire for Connection
Tightening Torque for Terminals
Terminals
Zone interface
box cover
Figure 6.2 The Position of Fixing Screws of Box Cover
Connect it directly
as shown below
Bare wire
Size
Tightening Torque (N·m)
M2.5
M4
M4
Fixing screws
16
0.4
1.0-1.3
1.0-1.3