Step6. The confirmation screen is displayed.
Select "Yes" and press "OK" to confirm the settings
and Step2 is displayed.
7.1.2.4 Nominate Spill Zone(s)
Step1. Select "Nominate Spill Zone(s)" and press "OK".
Step2. Press " " or " " to select spill zone.
Press " " or " " to select zone.
Step3. Press "OK" to save the setting and return to
Zone Installation Menu. Or press " " to return
to Zone Installation Menu without saving the setting.
NOTES:
•
If common zone is not available, at least one spill zone should be nominated.
•
Spill Zone1-3 should be set to different zones.
INSTALLATION & MAINTENANCE MANUAL
OK
OK Select
OK Confirm
27
Zone Labeling
Bedroom 2
Register these contents ?
Yes
No
Select
Zone Installation Menu
Common Zone Setup
Zone Actisation
Zone Labeling
Nominate Spill Zone(s)
Sensor Assignment
Nominate Si Zone isW
Item
Status
Si Zone 1
Zone 1
N/A
Si Zone #
Si Zone 2
N/A
Bac9
(Mon) 16:30
Back
Back