Hitachi airCore 700 Installation & Maintenance Manual page 46

INSTALLATION & MAINTENANCE MANUAL
10.2.2.2 Temperature Setting
NOTES:
•
Please refer to Wired Remote Controller Installation Manual for the setting of temperature
gradient (0.5°C or 1°C).
•
The temperature of each thermostat can be controlled to within ±3°C of the temperature that is
set on the wired remote controller (PC-ARFG2-Z) main screen.
For example, if the temperature that set on the wired remote controller ( PC-ARFG2-Z) main
screen is 23°C, then the temperature setting range of the thermostat is:
○ the maximum temperature that can be set on each thermostat is 26°C (+3°C).
○ the minimum temperature that can be set is 20°C (-3°C).
Operation step:
Press " " or "
temperature gradient selected, the temperature increases or decreases by 0.5°C or 1°C.
10.2.2.3 Setting Airflow Tap
Operation step:
Press" " to change airflow tap as showed in Figure10.5, the airflow tap changes sequentially as
shown below.
" on the thermostat to select desired temperature. Depending on the
Med
Low
Figure10.4
Figure10.5
High
Auto
42