Indoor Unit Configuration Setting - Hitachi airCore 700 Installation & Maintenance Manual

7.2 Indoor Unit Configuration Setting

(1) Temperature control
The detailed setting steps of c8-01 are as follows:
Function Selection
Function Selection is set from Installation Menu of the Wired Remote Controller.
Step1. Select "Installation Menu" and press "OK" .
Step2. Select "Function Selection "and press "OK".
Step3. Press "OK".
Step4. Press "
" or " "
→It changes in the order of "b-J" ↔ "K-P" ↔ "q-S" ↔ " ".
Step5. Press " ", " ", " ", or " " to select the c8 item to set from the
list area. Press "
setting value to 01.
Step6. To confirm the setting, press " " in the tab selection mode.
Step7. Select "Yes" and press "OK" to confirm the setting and return
to Step2.
Select "No" and press "OK" to discard the settings and return
to Step2.
Press " "to return to Step5.
Please change the value of Function Selection C8 (Sensor selection for indoor
temp. control) to 01. This setting is required for the room temperatures to be
sensed from the individual thermostats or sensors.
to select the type tab and press "OK".
" and press "
" or " " to change the
INSTALLATION & MAINTENANCE MANUAL
OK
OK
OK OK
b-J
K-P
q-S
OK
b-J
K-P
q-S
OK
33
Service & Installation
Service Menu
Installation Menu
Check Menu
Select
Installation Menu
Test Run
Function Selection
Thermistor Selection
Input/Output
Thermistor Calibration in Controller
Select
Installation Menu
Test Run
The function descriptions are for
reference only. Refer to technical
Function Selection
documents of unit for details.
Input/Output
OK
Thermistor Selection
OK
Thermistor Calibration in Controller
Select Enter
Function Selection : 00-00
b1: Set heating temperature compensation
01:Tset+0 o C( no compensation)
b1 00 b7 00 bd 00 C5
b2 00 b8 00 bE 00 C6
b3 00 b9 00 C1 00 C7
b4 00 bA 00 C2 00 C8
b5 00 bb 00 C3 00 C9
b6 00 bC 00 C4 00 CA
Select
Type tab List area
Function Selection : 00-00
Cancellation of Heating Temp Compensation due to Uneven Heat Load
01:Standard(Set Temp. +7oF(+4oC))
Confirm function selection setting?
b1 01 b7 00 bd 00 C5
b2 00 b8 00 bE 00 C6
b3 00 b9 00 C1 00 C7
Yes No
b4 00 bA 00 C2 00 C8
b5 00 bb 00 C3 00 C9
b6 00 bC 00 C4 00 CA
Select
(Mon) 16:30
Back
(Mon) 16:30
Back
Back Back
00
00
00
01
00
00
Back
00
00
00
00
00
00
Back Back