Table of Contents
Advertisement
MEX-M72BT/N5300BT/N7300BD
Ver. 1.1
7-2.
CHASSIS TOP SECTION
(Former type)
#2
(See Note 3)
#2
(See Note 3)
B
(Former type)
cover bottom
(See Note 3)
B
Note 1: When handling the CD mechadeck (Ref. No. CDM1), make sure
to refer to "ABOUT THE HANDLING OF THE MECHANISM
DECK" on page 10.
Also, the CD mechadeck cannot be disassembled for repair and
replacement. If the internal parts or board of the CD mechadeck
is malfunctioning, replace the whole CD mechadeck with a new
one.
Note 3: The shapes of the chassis top and cover bottom were changed
from the midway of production, as well as the number of screws
used for those parts.
Ref. No.
Part No.
Description
0 CDM1
1-493-353-11
MECHADECK, CD (FC2-2100NXP) (See Note 1)
FFC1
1-912-417-11
FLEXIBLE FLAT CABLE (24 CORE)
66
not supplied
(chassis top)
(See Note 3)
#2
(See Note 3)
D
#2
(See Note 3)
#1
(New type)
cover bottom
(See Note 3)
C
A
cover bottom section
Remark
(Length: 150 mm) (See Note 2)
(New type)
#2
(See Note 3)
C
D
CDM1
(See Note 1)
#1
#1
FFC1
(See Note 2)
A
#3
#3
(Former type)
#3
cover bottom
(See Note 3)
Note 2: Anti-static measures are required before removing the fl exible fl at
cable (24 core) (Ref. No. FFC1) that connects the CD mechadeck
(Ref. No. CDM1) and complete MAIN board (Ref. No. 52: page
67), and after installing it.
Make sure to refer to "ABOUT ANTI-STATIC MEASURES
PROCESSING AT THE DETACHING/INSTALLING THE
MECHANISM DECK" on page 11 and perform anti-static mea-
sures.
Ref. No.
Part No.
#1
7-685-790-01
#2
7-685-792-09
#3
7-685-794-01
Sony CONFIDENTIAL
For Authorized Servicer
not supplied
(chassis top)
(See Note 3)
D
#2
(See Note 3)
(New type)
cover bottom
(See Note 3)
Description
SCREW +PTT 2.6X4 (S)
SCREW +PTT 2.6X6 (S)
SCREW +PTT 2.6X10 (S)
Remark
SYS SET
Advertisement
Table of Contents
