FUNCTION MENU
5.14 INDIVIDUAL LOUVER SETTING
This function is to individually set the air direction of multiple air
outlets.
?
N O T E
•
This function is available when the indoor unit supports individual
louvers.
•
It cannot be set while the air conditioner is stopped.
•
The fan speed changes to "LOW" while this function is being set.
(After the setting is completed, the unit operation is back to normal.)
•
As for "Start-up of Heating Operation", "During Defrost Operation"
and "Activation of Thermo-Controller", all the louver angles are
automatically secured horizontally when this function is activated.
•
This function is not available if two remote controllers (including a
combination of wired controller + wireless controller) are used.
1 Select "Individual Louver Setting" on the "Function Menu"
and press "OK".
Function Menu
Elevating Grille
Reset Filter Reminder Time
Filter Cleaning
FrostWash Setting
Individual Louver Setting
Enter
OK
2 Select "Individual Louver Setting" and press "OK".
?
N O T E
If there is one indoor unit connected with the controller, Step4 is displayed.
Individual Louver Setting
Individual Louver Setting
Cancel Individual Louver Setting
Enter
OK
33
PMML0565 rev.0 - 09/2021
3 Press" ", " ", " ", or " " to select the indoor unit to change
the louver direction, and press "OK".
?
N O T E
The indoor unit displayed on the screen flashes if an individual louver is
set.
00-00
00-01
00-02
Enter
(Mon) 16:30
OK
4 Press " " or " " and select the louver from 1 to 4.
The selected louver is opened while the unselected louvers
are closed.
Back
Indv.
Adjust air direction & louver angle.
5 Press" " or " " to select the louver angle and press "OK".
Return to Step3.
The louver angle is changed as follows.
Indv.
Indv.
6 Ensure that individual "Indv." is turned on at the Louver on
the home screen.
Back
21
Temp
Individual Louver Setting
Select Unit to Set
00-00
2
3
1
Indv.
Indv.
Indv.
Indv.
Indv.
Indv.
Conference Room
21
Cool
Fan Speed Louver
Back
4
OK
Indv.
Back
Indv.
Indv.
Swing
C
Indv.
Menu