Icon Description - Hitachi PC-ARFG-E Installation & Operation Manual

ICON DESCRIPTION

4 ICON DESCRIPTION
The status of the remote controller is displayed on the operation screen.
?
N O T E
• It may not be displayed depending on the type of outdoor unit or indoor unit you are using.
• If there are multiple status, the high priority icon is displayed first.
No. Icon
1
2
3
4
5
6
7
8 Air-conditioning in Thermo-ON
Ventilation
Total heat ventilation
9
Automatic ventilation
Normal ventilation
10
** ºC
11 Elevating
12 In emergency operation
13 In setback
14 Night purge
15 Setback aborted
16 In motion sensor control
17 In radiant sensor control
18 Cold air under control
19 Outdoor operation noise reduction
20 FrostWash is performed
Outside the indoor temperature range,
21
frostWash discontinued
Outside the outdoor temperature
22
range, frostWash discontinued
Power savings
Power savings: Low
23
Power Savings: Med
Power savings: High
24 External power savings
7 PMML0565 rev.0 - 09/2021
A schedule timer is set.
Set the current time. Schedule timer operation is not possible.
The off timer is set.
The operation lock is set.
Displayed when using the central controller. Remote control operation is restricted.
It is time to freeze-clean the heat exchanger.
It is time to clean the air filter.
Air-conditioning operation is performed.
Ventilation, automatic ventilation, total heat ventilation, and normal ventilation are operating.
Displays the room temperature. (*1)
Elevating grille is not stored correctly.
Emergency operation is in progress.
When setback operation is enabled and the card key is removed (when no one is present). (*2)
In night purge progress.
Setback is aborted.
Indicates capacity savings by motion sensor control during operation or stop.
In order to efficiently heat the room when the radiant temperature is low, the wind direction and
air volume are automatically controlled.
In order to to prevent indoor temperature from being too low.
The operation noise reduction control of the outdoor unit is set.
Indicates the frostWash is performed.
If the indoor temperature is out of the range of 15°C to 30°C, no frostWash is performed and the
cancellation is displayed.
If the outdoor temperature is out of the range of 1°C to 43°C, no frostWash is performed and the
cancellation is displayed.
Either the outdoor capacity control, indoor rotation control, or intermittent operation control is
set.
Outdoor capacity control is set on the central controller or outdoor unit.
It does not light when the indoor rotation control or intermittent operation control of the remote
controller is set.
Description