Materials Of Manuals; Disposal; Applicable Standards - ABB ACS580 Series Hardware Manual

￭

Materials of manuals

Printed product manuals are made of recyclable paper. Product manuals are
available on the Internet.

Disposal

The main parts of the drive can be recycled to preserve natural resources and
energy. Product parts and materials should be dismantled and separated.
Generally all metals, such as steel, aluminum, copper and its alloys, and precious
metals can be recycled as material. Plastics, rubber, cardboard and other packaging
material can be used in energy recovery.
Printed circuit boards and DC capacitors need selective treatment according to
IEC 62635 guidelines.
To aid recycling, most plastic parts are marked with an appropriate identification
code. In addition, components containing substances of very high concern (SVHCs)
are listed in European Chemicals Agency's SCIP database. SCIP is the database for
information on Substances of Concern In articles as such or in complex objects
(Products) established under the Waste Framework Directive (2008/98/EC). For
further information, contact your local ABB distributor or consult European
Chemicals Agency's SCIP database to find out which SVHCs are used in the drive,
and to find out where those components are located.
Contact your local ABB distributor for further information on environmental
aspects. End of life treatment must follow international and national regulations.
For more information on ABB end of life services, see
new.abb.com/service/end-of-lifeservices.

Applicable standards

The drive complies with the following standards. The compliance with the European Low
Voltage Directive is verified according to standard EN 61800-5-1.
EN 60204-1:2018,
EN 60204-1:2006 +
AC:2010
IEC 60146-1-1:2009
EN 60146-1-1:2010
IEC 60529:1989 +
AMD1:1999 + AMD2: 2013,
EN 60529:1991 + A1:2000
+ A2: 2013
Safety of machinery. Electrical equipment of machines. Part 1:
General requirements. Provisions for compliance:
The final assembler of the machine is responsible for installing
• emergency-stop device
• supply disconnecting device.
Semiconductor converters - General requirements and line
commutated converters - Part 1-1: Specification of basic require-
ments
Degrees of protection provided by enclosures (IP code)
Technical data 353