Installing The Drive Vertically, Frame R5 - ABB ACS580 Series Hardware Manual

88 Mechanical installation
7. Attach the cable box cover to the front cover.
8. Install the cable box to the frame. Position the cable box (8a) and tighten the
screws (8b).
6
6a
Note: Install the hood to UL Type 12 drives after you have installed the drive
electrically and reinstalled covers, see
￭

Installing the drive vertically, frame R5

Select fasteners and their application to meet local requirements appropriate to
wall surface materials, drive weight and application.
1. Mark the hole locations using the mounting template included in the package.
Do not leave the mounting template under the drive. The drive dimensions
and hole locations are also shown in the drawings in chapter
drawings (page
2. Drill the mounting holes.
3. Insert fixing anchors or plugs into the holes. Start the two upper bolts and the
two lowest bolts into the anchors or plugs.
7
6b
Installing UL Type 12 hood (page
363).
8
8b
8a
212).
Dimension
8b