D20E-C Module Digital Inputs; D20E-C Module Analog Inputs - GE Multilin D20E Installation And Maintenance Manual

D20E-C module digital inputs

D20E-C module analog inputs

98
TB2 Descriptions
36 Status Input 2
37 Status Input 3
38 Status Input 4
39 Status Input 5
40 Status Input 6
41 Status Input 7
42 Status Input 8
43 Status Input 9
44 Status Input 10
45 Status Input 11
46 Status Input 12
47 Status Input 13
48 Status Input 14
49 Status Input 15
50 Status Input 16
The D20E-C allows up to 16 status inputs. The field terminations for:
• Status inputs are assigned from TB2-35 to TB2-50 and
• Dry contact wetting common are assigned from TB2-84 to TB2-99
• External digital input supply connections on TB2-1 (+/‒) and TB2-51 (‒/+)
Termination block TB2 is a two-tier block where TB2-35 and TB2-84 are physically located
one above the other.
See Table 26 for the terminal block assignments.
The D20E-C supports up to 16 differential analog inputs. The field terminations for analog
input are provided by TB2-15 to TB2-34 and TB2-64 to TB2-83.
See Table 26 for termination block details.
One shield termination is allocated for two adjacent inputs. See Table 26 for the terminal
block assignments.
GE INFORMATION
CHAPTER 7: CONNECTING FIELD WIRING TO THE D20E MODULE
TB2 Descriptions
86 Status Wetting 1to 16
87 Status Wetting 1to 16
88 Status Wetting 1to 16
89 Status Wetting 1to 16
90 Status Wetting 1to 16
91 Status Wetting 1to 16
92 Status Wetting 1to 16
93 Status Wetting 1to 16
94 Status Wetting 1to 16
95 Status Wetting 1to16
96 Status Wetting 1to16
97 Status Wetting 1to16
98 Status Wetting 1to16
99 Status Wetting 1to16
100 No Connection
D20E ETHERNET I/O MODULE INSTRUCTION MANUAL