Playing Back An Audio File - Kenwood TS-890S Instruction Manual

Playing Back an Audio File

Follow the steps below to play back audio files that are stored in
the built-in memory or a USB flash drive.
To use a USB flash drive, insert it into
and check to ensure that it is recognized by this transceiver.
1 Press F1 [RX PLAY] to display the audio recording
file screen.
2 Press F7 [INT.MEM] or F7 [USB.MEM] to toggle
between the screens for the built-in memory and
USB flash drive.
• Pressing F7 [INT.MEM] displays the audio file (built-in
memory) screen. "Internal" is shown on the screen.
• Pressing F7 [USB.MEM] displays the audio file (USB flash
drive) screen. "USB" is shown on the screen.
• To change the folder to browse, press F1 [FOLDER].
• Files recorded using the timer-recording reservation
function are stored in the TIMER_REC folder, while all other
recordings are stored in the RX_REC folder.
3 Press F2[
]/ F3[
control to select the audio file to play back.
4 Press F4 [PLAY] or [ ] to play back the audio file.
.
(USB-A) in advance
] or turn the [MULTI/CH]
VOICE MESSAGE/AUDIO FILE 12
The following operations are possible while an audio file is being
played back.
Operation
Fast forwards the audio file. Release the
Press and hold F5 [FF
key to resume playback at the normal
].
speed.
Press and hold F2 [ Rewinds the audio file. Release the key to
REW] . resume playback at the normal speed.
Pauses the audio file. Pressing F3
[PLAY] while playback is paused resumes
Press F3 [ PAUSE].
playback from the position where it was
paused.
Plays back from the beginning of the audio
Press F7 [NEXT ]. file that immediately precedes the audio file
that is current playing.
Plays back from the beginning of the audio
Press F1 [ PREV]
file that immediately follows the audio file
twice quickly.
that is current playing.
Plays back the currently playing audio file
Press F1 [ PREV]
again from the beginning.
once.
Press F4 [ STOP]. Stops playback of the audio file.
Exits the audio file playback screen and
Press [ESC].
audio recording file list screen.
Cueing is possible when 2 or more audio
Turn [MULTI/CH].
files are saved.
RX audio is muted during playback of an audio file.
●
Transmission is also disabled.
The playback position can be changed by touching the
●
progress bar while playing an audio file.
When removing the USB flash drive, make sure to
●
execute "Safely Removing the USB Flash
Behavior
Drive" (11-6).
12-5