Registering A Name For A Voice Message; Playing Back A Voice Message; Adjusting The Playback Volume - Kenwood TS-890S Instruction Manual

12 VOICE MESSAGE/AUDIO FILE

Registering a Name for a Voice Message

Recorded voice messages can be assigned with a name.
1 Press F2 [TX MSG] to display the Voice Message
screen.
.
2 Select the voice message to name.
3 Press F6 [NAME].
Doing so enables editing of the voice message name.
.
4 Use the function keys, [MULTI/CH] control or USB
keyboard to input the characters.
Key
F1 [SPACE]
F2 [–]/ F3 [+]
F4 [ ]/ F5 [ ]
F [BACK SPACE]
F [DEL]
F [CHAR]
5 Press F6 [SAVE] to save the name of the voice
message.
• Pressing F7 [CANCEL] discards the input characters and
exits the editing mode for the voice message name.
12-2
Operation
Inserts a space.
Selects a character.
Moves the cursor.
Deletes the character to the left of the
cursor.
Deletes the character to the right of the
cursor.
Switches the type of character to edit.
Pressing the key each time switches the
selection in the following sequence:
ABC (upper case) → abc (lower case)
→ !"# (symbols) → ABC (upper case)

Playing Back a Voice Message

Follow the steps below to play back a recorded voice message.
1 Select a voice message channel to play back.
2 Press F4 [PLAY] to play back the voice message.
The voice message playback screen appears.
. The following operations are possible while a voice message is
being played back.
Operation
Fast forwards the voice message.
Press and hold F6 [FF
• Release the key to resume playback at
].
Rewinds the voice message.
Press and hold F2 [
• Release the key to resume playback at
REW] .
Pauses the voice message.
Press F3 [ PAUSE].
Press F3 [ PLAY] while Resumes playback from the position where
it was paused.
playback is paused
Press F4 [ STOP]. Stops the playback of voice message.
Closes the Voice Message screen and
Press [ESC].
ends the playback.

Adjusting the Playback Volume

Configure the volume level when playing back a voice message.
Configure in Menu [1-01] "Voice Message Volume
(Play)"
Setting Value Off/ 1 to 10 (default) to 20 (1 step)
Configuring to a larger value raises the volume level. Selecting
"Off" mutes the playback sound.
When TX monitor is ON, the voice message is output as
●
the TX monitor audio so the volume changes in tandem
with the TX monitor level.
For more details on adjusting the TX monitor level,
●
please refer to (8-3).
Behavior
the normal speed.
the normal speed.