Bosch NDP-5512-Z30C User Manual
  1. Manuals
  2. Brands
  3. Bosch Manuals
  4. Security Camera
  5. NDP-5512-Z30C
  6. User manual

Bosch NDP-5512-Z30C User Manual

Hide thumbs Also See for NDP-5512-Z30C:
Table of Contents

Advertisement

Quick Links

Download this manual
AUTODOME IP starlight 5000i
NDP‑5512‑Z30 │ NDP‑5512‑Z30C
en
User Manual

Advertisement

Table of Contents
loading

Related Manuals for Bosch NDP-5512-Z30C

Summary of Contents for Bosch NDP-5512-Z30C

  • Page 1 AUTODOME IP starlight 5000i NDP‑5512‑Z30 │ NDP‑5512‑Z30C User Manual...

  • Page 3: Table Of Contents

    User Management Date/Time Display Stamping GB/T 28181 Web Interface Appearance LIVE Functions Camera Installer Menu Scene Mode 6.2.1 Picture Settings 6.2.2 Enhance 6.2.3 Scene Mode Scheduler Color Enhance Scene Mode Scheduler Bosch Security Systems User Manual 2019-11 | 1.2 |...
  • Page 4 Video Content Analysis (VCA) Audio Alarm Alarm E-Mail Alarm Task Editor Alarm Rules Network Network Services Network Access DynDNS Advanced Network Management Multicast Image Posting Accounts IPv4 Filter 9.10 Encryption Service 10.1 Maintenance 2019-11 | 1.2 | User Manual Bosch Security Systems...
  • Page 5 Table of contents | en 10.2 Licenses 10.3 Certificates 10.4 Logging 10.5 Diagnostics 10.6 System Overview AUX Commands Troubleshooting 12.1 Rebooting the unit 12.2 Physical reset button 12.3 Customer Service and Support Bosch Security Systems User Manual 2019-11 | 1.2 |...

  • Page 6: Introduction

    If you cannot connect, the unit may have reached its maximum number of connections. Depending on the device and network configuration, each unit can have up to 50 web browser connections, or up to 100 connections via Bosch Video Client or Bosch Video Management System.

  • Page 7: Password Protection In Camera

    (“service”) and the service-level password every time that they access the device. Fill in the fields User name and Password. Click OK. If the password is correct, the desired page appears. Bosch Security Systems User Manual 2019-11 | 1.2 |...

  • Page 8: System Overview

    Click this icon to configure the device. Dashboard Click this icon to see detailed system information. Links Click this icon to navigate to the Bosch download store. Click this icon to get context-sensitive help for the page you are browsing. Live page The Live page is used to display the live video stream and control the unit.

  • Page 9: Dashboard

    The Dashboard page is used to display detailed information about the device. The Dashboard is only visible in the application bar if the Show 'Dashboard' option is enabled by a service-level user in the Configuration -> Web Interface -> Appearance page. Bosch Security Systems User Manual 2019-11 | 1.2 |...

  • Page 10: Operation Via The Browser

    Note: If the pre-position is already stored, a dialog box displays the message, “Overwrite current pre-position?” Click OK to overwrite, or click Cancel to cancel the operation. Click to display the selected pre-position in the video image. 2019-11 | 1.2 | User Manual Bosch Security Systems...

  • Page 11: Aux Control

    Click this button to trigger the camera to seek its home position. The OSD displays the message, “OSD: Finding Home Position.” Focus Click this button to activate the Auto Focus One Push mode on the camera. Bosch Security Systems User Manual 2019-11 | 1.2 |...

  • Page 12: Recording Status

    When a local storage card is available, the memory card icon changes color (green, orange or red) to indicate the local storage activity. If you hover over this icon with the mouse the storage activity is shown as a percentage. 2019-11 | 1.2 | User Manual Bosch Security Systems...

  • Page 13: Status Icons

    (With VRM recording this option is not active.) The panel on the left has four groups: – Connection – Search – Export – Track list Bosch Security Systems User Manual 2019-11 | 1.2 |...

  • Page 14: Selecting The Recording Stream

    The buttons have the following functions: – Start/Pause playback – Select the playback (forward or backward) speed using the speed regulator – Step forward or backward frame-by-frame when paused (small arrows) 2019-11 | 1.2 | User Manual Bosch Security Systems...

  • Page 15: General

    A check mark in this check box indicates that at least one certificate is loaded onto the camera. If no certificates are loaded, then “No certificate installed” appears to the right of the text. The Escrypt certificate is a root certificate for Bosch Security Systems that proves that the device meets the following criteria: –...

  • Page 16: Date/Time

    DST table is automatically created. If you decide to create alternative daylight saving time dates by editing the table, note that values occur in linked pairs (DST start and end dates). 2019-11 | 1.2 | User Manual Bosch Security Systems...

  • Page 17: Display Stamping

    To place a logo on the image, select and upload an uncompressed .bmp file with a maximum size of 128x128 pixels and 256 colors to the camera. Its position on the image can then be selected. Bosch Security Systems User Manual 2019-11 | 1.2 |...
  • Page 18 Specify the exact position (Position (XY)). In the Position (XY) fields, enter the values for the desired position. Title region Select On to set or to edit the position of the title region on the OSD. 2019-11 | 1.2 | User Manual Bosch Security Systems...

  • Page 19: T 28181

    This page allows you to set the parameters for conformance to the GB/T 28181 national standard “Security and protection video monitoring network system for information transport, switch and control”. This standard is specifically for China. Bosch Security Systems User Manual 2019-11 | 1.2 |...
  • Page 20 Enter the ID of the device. Device port Enter the number of the device port. The default is 5060. Password Enter the appropriate password. Alarm device ID Enter the ID of the alarm device. 2019-11 | 1.2 | User Manual Bosch Security Systems...

  • Page 21: Web Interface

    The trajectory is shown as a green line following the object base point. Show overlay icons Select this check box to show overlay icons on the live video image. Bosch Security Systems User Manual 2019-11 | 1.2 |...

  • Page 22: Live Functions

    Here you can specify whether the Live page displays the section Show 'AUX Control'. Show ‘Special Functions’ Video file format Select a file format for the live page display. The MP4 format does not include metadata. 2019-11 | 1.2 | User Manual Bosch Security Systems...

  • Page 23: Camera

    – Vibrant This mode provides a more vivid image with increased contrast, sharpness, and saturation. Bosch Security Systems User Manual 2019-11 | 1.2 |...

  • Page 24: Picture Settings

    – Fixed: no enhancement. This setting disables the Max. Gain Level option. Fixed Gain Use the slide to select the desired number for fixed gain. The default is 2. 2019-11 | 1.2 | User Manual Bosch Security Systems...

  • Page 25: Enhance

    Select Off to deactivate the feature. – Auto - Stabilization activates automatically when the camera detects vibration greater than the set threshold. Sharpness mode Select the appropriate sharpness mode. Options are Manual and Auto. Bosch Security Systems User Manual 2019-11 | 1.2 |...

  • Page 26: Scene Mode Scheduler

    – In Manual mode the Red, Green, and Blue gain can be manually set to a desired position. 2019-11 | 1.2 | User Manual Bosch Security Systems...
  • Page 27 When White balance is in an auto mode, and RGB-weight white balance is On, this field appears. Adjust the slide for blue-gain weight (from -5-0 to +50, with 0 as the default). Reducing blue introduces more yellow. Bosch Security Systems User Manual 2019-11 | 1.2 |...

  • Page 28: Alc

    In scenes where a change of the iris opening affects the gain, closing the iris causes more video noise and increases bandwidth. Increased motion blur may also occur when the iris is more closed. 2019-11 | 1.2 | User Manual Bosch Security Systems...

  • Page 29: Enhance

    (Dual Streaming), which compression settings you can select individually, for example one setting for transmissions to the Internet and one for LAN connections. Pre-programmed profiles are available, each giving priority to different perspectives. Bosch Security Systems User Manual 2019-11 | 1.2 |...
  • Page 30 This can be particularly advantageous with low bandwidths. The image rate is displayed next to the slider. Video resolution Select the desired resolution for the video image. Note: The value in this field adjusts the resolution for SD streams only. 2019-11 | 1.2 | User Manual Bosch Security Systems...
  • Page 31 Select the appropriate encoding quality level for an object region defined in Encoder Regions. The lower the QP value, the higher the encoding quality. Default Click Default to return the profile to the factory default values. Bosch Security Systems User Manual 2019-11 | 1.2 |...

  • Page 32: Encoder Streams

    (shape) in the preview of the video image. – Drag the center, corner points, or sides of the shaded area (shape). – Double-click a side to add additional points to the area (shape). 2019-11 | 1.2 | User Manual Bosch Security Systems...

  • Page 33: Encoder Statistics

    – To reposition a zone, place the cursor over the zone, hold down the mouse button and drag into position. Bosch Security Systems User Manual 2019-11 | 1.2 |...

  • Page 34: Picture Settings

    Select the percentage of light or color in the video image. The range of options is from 60% to 200%; the default is 100%. Color hue Select the degree of color in the video image. The range of options is from -14° to 14°; the default is 0°. 2019-11 | 1.2 | User Manual Bosch Security Systems...
  • Page 35 Adjusts the level of light at which the camera automatically switches out of night mode (B/W) operation. Select a value between 10 and 55 (in increments of 5; default 30). The lower the value, the earlier the camera will switch to color mode. Bosch Security Systems User Manual 2019-11 | 1.2 |...

  • Page 36: Lens Settings

    Note 1: You can save a total of 15 minutes of recorded actions between the two tours. To record a tour: Click the Start Recording button. The system prompts you to overwrite the existing tour. Click Yes to overwrite the existing tour movements. 2019-11 | 1.2 | User Manual Bosch Security Systems...

  • Page 37: Pre-Positions And Tours

    ( To overwrite an existing pre-position: – Use the PTZ controls to navigate to the new pre-position. – In the list Pre-positions, select the pre-position that you want to overwrite. Bosch Security Systems User Manual 2019-11 | 1.2 |...

  • Page 38: Pre-Position Mapping

    To stop the tour, type 8 and click AUX off. 6.16 Pre-position mapping Pre-position mapping allows you to map a function to a pre-position action. This feature works for Bosch protocols and for non-Bosch protocols. Action Select the appropriate action: Show or Set. Pre-position Enter the number of the pre-position to map.

  • Page 39: Sectors

    Input volume Set the input volume using the slide. Values range from 0 to 119. Line Out Set the line output gain using the slider. Values range from 0 to 115. Bosch Security Systems User Manual 2019-11 | 1.2 |...

  • Page 40: Pixel Counter

    To change the shape of a zone, place the cursor over the edge of the zone, hold down the mouse button and drag the edge of the zone to the required position. 2019-11 | 1.2 | User Manual Bosch Security Systems...

  • Page 41: Recording

    The Storage overview field displays the local media. Note: The recording performance of the SD card depends on the speed (class) and the performance of the SD card. Bosch recommends an SD card of Class 6 or higher. Bosch Security Systems User Manual 2019-11 | 1.2 |...

  • Page 42: Activating And Configuring Storage Media

    – If you change a profile’s settings, click Set to save. – If necessary, click Default to return all settings to their factory defaults. 2019-11 | 1.2 | User Manual Bosch Security Systems...
  • Page 43 If the target has not yet been defined, click Configure accounts to jump to the Accounts page where the server information can be entered. Alarm triggers * Select the alarm type that is to trigger an alarm recording: – Alarm input – Analysis alarm Bosch Security Systems User Manual 2019-11 | 1.2 |...

  • Page 44: Maximum Retention Time

    The process must be repeated for deleting additional days. Time periods You can change the names of the recording profiles. Click a profile and then the Rename button. Enter your chosen name and then click the Rename button again. 2019-11 | 1.2 | User Manual Bosch Security Systems...

  • Page 45: Recording Status

    The following field may or may not appear, depending on your camera: Post JPEG from camera Click the checkbox to select the cameras from which JPEG images are sent. An enabled video input is indicated by a check mark. Bosch Security Systems User Manual 2019-11 | 1.2 |...

  • Page 46: Sd Card Status

    SD Card Status This section identifies the following details about the SD card installed in the camera: – Manufacturer – Product – Size – Lifespan Check – Lifespan – Lifespan alarm 2019-11 | 1.2 | User Manual Bosch Security Systems...

  • Page 47: Alarm

    Multicast operation is not possible. To enable Multicast operation, select the UDP option for the Video transmission parameter here and on Network Access. Stream Select the number of the stream from the drop-down list. Bosch Security Systems User Manual 2019-11 | 1.2 |...
  • Page 48 The following field may or may not appear, depending on your camera: Audio Select On to activate audio alarms. The following field may or may not appear, depending on your camera: 2019-11 | 1.2 | User Manual Bosch Security Systems...

  • Page 49: Video Content Analysis (Vca)

    A separate Help file provides information about configuring for the VCA settings. Note: Full VCA configuration and Help is only available on the web browser when MPEG ActiveX software from Bosch is installed on your computer. MPEG ActiveX software is available from the Bosch Security Systems DownloadStore (https://downloadstore.boschsecurity.com/) To open the VCA Help in the web browser: Select Configuration >...
  • Page 50 This option allows detection, independently of motion alarms, manipulation of the orientation or location of a camera resulting from turning the camera mount bracket, for example. 2019-11 | 1.2 | User Manual Bosch Security Systems...

  • Page 51: Audio Alarm

    Enter the IP address of a mail server that operates on the SMTP standard (Simple Mail Transfer Protocol). Outgoing e-mails are sent to the mail server via the address you entered. Otherwise leave the box blank (0.0.0.0). SMTP port Select the appropriate SMTP port. Bosch Security Systems User Manual 2019-11 | 1.2 |...

  • Page 52: Alarm Task Editor

    This will overwrite all settings and entries on the other alarm pages. Click Examples under the Alarm Task Editor field to see some script examples. A new window opens. 2019-11 | 1.2 | User Manual Bosch Security Systems...

  • Page 53: Alarm Rules

    (Refer to the “AUX Commands” section of the manual for a list of all AUX commands for your camera.) Click the checkbox Enabled to activate the alarm. Click Set to save. The camera’s system activates the alarm rules. Bosch Security Systems User Manual 2019-11 | 1.2 |...

  • Page 54: Network

    If you want the unit to establish a connection to a remote location in a different subnet, enter the IP address of the gateway here. Otherwise leave the box blank (0.0.0.0). 2019-11 | 1.2 | User Manual Bosch Security Systems...
  • Page 55 This deactivates all unsecured connections. Connections will then only be possible via the HTTPS port. You can activate and configure encryption of the media data (video and metadata) on the Encryption page (see Encryption). Bosch Security Systems User Manual 2019-11 | 1.2 |...

  • Page 56: Dyndns

    Notice! Information about the service, registration process and available host names can be found at DynDNS.org. Provider The value in this field defaults to dyndns.org. Select another option as necessary. 2019-11 | 1.2 | User Manual Bosch Security Systems...

  • Page 57: Advanced

    This field identifies any cloud-based services with which the camera communicates. – If you have registered the device on a cloud-based service such as Bosch Remote Portal, then this field identifies this fact (“Registered on Bosch Remote Portal”). Note: The button (Connect to Bosch Remote Portal) to connect to the device with that service is active.

  • Page 58: Network Management

    Click the checkboxes to select the required traps. All the checked traps will be sent. Click Set to accept the selection. UPnP Select On to activate UPnP communication. Select Off to deactivate it. 2019-11 | 1.2 | User Manual Bosch Security Systems...

  • Page 59: Multicast

    With the setting 0.0.0.0 the encoder for the relevant stream operates in multi-unicast mode (copying of data streams in the unit). The camera supports multi-unicast connections for up to five simultaneously connected receivers. Bosch Security Systems User Manual 2019-11 | 1.2 |...

  • Page 60: Image Posting

    When face recognition is available, selected images of the face can be sent to a target account. Enable Check the box to enable best face posting. File format Select the type of image to be sent. Target Select the target account for best face posting. 2019-11 | 1.2 | User Manual Bosch Security Systems...

  • Page 61: Accounts

    Enter the IPv4 address that you want to allow or block Mask 1 / 2 Enter the subnet mask for the appropriate IPv4 address. 9.10 Encryption If an encryption license is installed, this submenu gives access to the encryption parameters. Bosch Security Systems User Manual 2019-11 | 1.2 |...

  • Page 62: Service

    Licenses This window is for the activation of additional functions by entering activation codes. An overview of installed licenses is shown. The installation code of the unit is also displayed here. 2019-11 | 1.2 | User Manual Bosch Security Systems...

  • Page 63: Certificates

    This window is for information only and cannot be modified. Keep this information at hand when seeking technical support. Select the text on this page with a mouse and copy it so that it can be pasted into an e-mail if required. Bosch Security Systems User Manual 2019-11 | 1.2 |...

  • Page 64: Aux Commands

    Aux On, entered repeatedly, cycles adjustment through increasing speeds Super Slow, Slow, Medium, and Fast. Aux Off, decreases speeds through the same settings. On/Off Mask Calibration Procedure 1-256 Set/- Pre-position Programming 1-256 -/Shot Pre-position Recall 2019-11 | 1.2 | User Manual Bosch Security Systems...

  • Page 65: Troubleshooting

    Transmission mode is set to UDP. Camera reboots frequently or Test your camera with another power supply. intermittently. Check the Bosch website for a software update that might address the issue. No OSD messages appear. Bosch’s Video SDK is required. Video management software from third parties does not use the SDK.

  • Page 66: Rebooting The Unit

    If you cannot control the unit after the firmware upgrade, then cycle the power to the unit. If a power reset does not solve the problem, or if Configuration or video management software identifies the unit as “Videojet Generic,” then contact your Bosch Service Center for an RMA for the unit.

  • Page 67: Physical Reset Button

    For AUTODOME IP 5000i │ AUTODOME IP starlight 5000i models, the reset button is near the SD card slot. To access the reset button, remove the camera bubble and turn the camera block upside down. 1 Reset button 2 SD card slot Bosch Security Systems User Manual 2019-11 | 1.2 |...

  • Page 68: Customer Service And Support

    | Troubleshooting AUTODOME IP starlight 5000i 12.3 Customer Service and Support If this unit needs service, contact the nearest Bosch Security Systems Service Center for authorization to return and shipping instructions. Telephone: 800-366-2283 Fax: 800-366-1329 Email: cctv.repair@us.bosch.com Customer Service...
  • Page 69 AUTODOME IP starlight 5000i Troubleshooting | Bosch Security Systems User Manual 2019-11 | 1.2 |...
  • Page 70 | Troubleshooting AUTODOME IP starlight 5000i 2019-11 | 1.2 | User Manual Bosch Security Systems...
  • Page 72 Bosch Security Systems B.V. Torenallee 49 5617 BA Eindhoven Netherlands www.boschsecurity.com © Bosch Security Systems B.V., 2019...

This manual is also suitable for:

Ndp-5512-z30Autodome ip starlight 5000i

Table of Contents