Bosch AUTODOME IP starlight 7000i User Manual
  1. Manuals
  2. Brands
  3. Bosch Manuals
  4. Security Camera
  5. MIC IP starlight 7000i
  6. User manual

Bosch AUTODOME IP starlight 7000i User Manual

Hide thumbs Also See for AUTODOME IP starlight 7000i:
Table of Contents

Advertisement

Quick Links

AUTODOME IP starlight 7000i
NDP‑7512‑Z30│NDP‑7512‑Z30C│NDP‑7512‑Z30CT│NDP‑7512‑Z
30K
en
User Manual

Advertisement

Table of Contents
loading

Related Manuals for Bosch AUTODOME IP starlight 7000i

Summary of Contents for Bosch AUTODOME IP starlight 7000i

  • Page 1 AUTODOME IP starlight 7000i NDP‑7512‑Z30│NDP‑7512‑Z30C│NDP‑7512‑Z30CT│NDP‑7512‑Z User Manual...

  • Page 3: Table Of Contents

    AUTODOME IP starlight 7000i Table of contents | en Table of contents Introduction Systems requirements Establishing the connection Password protection in camera System overview Live page Playback Configuration Dashboard General Identification User Management Date/Time Display Stamping GB/T 28181 Web Interface...
  • Page 4 | Table of contents AUTODOME IP starlight 7000i Maximum Retention Time Recording Scheduler Recording Status Recording Statistics Image Posting Alarm Alarm Connections Video Content Analysis (VCA) Virtual Masks Audio Alarm Alarm E-Mail Alarm Inputs Alarm Outputs Alarm Task Editor...

  • Page 5: Autodome Ip Starlight 7000I Table Of Contents | En

    AUTODOME IP starlight 7000i Table of contents | en 10.2 Playback 10.2.1 Selecting the recording stream 10.2.2 Searching for recorded video 10.2.3 Exporting recorded video 10.2.4 Controlling playback 10.3 Dashboard Using your AUTODOME camera 11.1 Using Intelligent Tracking 11.2 Recommended Use of Your Camera Troubleshooting 12.1...

  • Page 6: Introduction

    100 connections via Bosch Video Client or BVMS. Project Assistant In order to use this device with the Project Assistant app by Bosch, you must download the app from the Bosch Download Store, from Google Play, or from the Apple Store.

  • Page 7: Password Protection In Camera

    AUTODOME IP starlight 7000i Introduction | en Password protection in camera The camera requires a strong password. Follow the prompts in the dialog box, which specifies what is required. The system measures the strength of the password that you enter.

  • Page 8: System Overview

    Click this icon to configure the device. Dashboard Click this icon to see detailed system information. Links Click this icon to navigate to the Bosch download store. Click this icon to get context-sensitive help for the page you are browsing. Live page The Live page is used to display the live video stream and control the unit.

  • Page 9: Dashboard

    AUTODOME IP starlight 7000i System overview | en Dashboard The Dashboard page is used to display detailed information about the device. The Dashboard is only visible in the application bar if the Show 'Dashboard' option is enabled by a service-level user in the Configuration -> Web Interface -> Appearance page.

  • Page 10: General

    A check mark in this check box indicates that at least one certificate is loaded onto the camera. If no certificates are loaded, then “No certificate installed” appears to the right of the text. The Escrypt certificate is a root certificate for Bosch Security Systems that proves that the device meets the following criteria: –...

  • Page 11: Date/Time

    AUTODOME IP starlight 7000i General | en The device has three authorization levels: service, user, and live. – service is the highest authorization level. Entering the correct password gives access to all the functions and allows all configuration settings to be changed.

  • Page 12: Display Stamping

    | General AUTODOME IP starlight 7000i Daylight saving time The internal clock can switch automatically between normal and daylight saving time (DST). The unit already contains the data for DST switch-overs for many years in advance. If the date, time and zone have been set up correctly, a DST table is automatically created.
  • Page 13 AUTODOME IP starlight 7000i General | en Logo To place a logo on the image, select and upload an uncompressed .bmp file with a maximum size of 128x128 pixels and 256 colors to the camera. Its position on the image can then be selected.
  • Page 14 | General AUTODOME IP starlight 7000i Specify the exact position (Position (XY)). In the Position (XY) fields, enter the values for the desired position. Title region Select On to set or to edit the position of the title region on the OSD.

  • Page 15: T 28181

    AUTODOME IP starlight 7000i General | en GB/T 28181 This page allows you to set the parameters for conformance to the GB/T 28181 national standard “Security and protection video monitoring network system for information transport, switch and control”. This standard is specifically for China.

  • Page 16: Web Interface

    | Web Interface AUTODOME IP starlight 7000i Web Interface Appearance You can adapt the appearance of the web interface and change the website language to meet your requirements. GIF or JPEG images can be used to replace the company and device logos. The image can be stored on a web server (for example, http://www.myhostname.com/images/logo.gif).

  • Page 17: Live Functions

    AUTODOME IP starlight 7000i Web Interface | en – Green: Fields, lines and routes used in a task are displayed in green. They can be edited but not deleted. – Red: Fields, lines and routes currently in alarm mode are displayed in red.
  • Page 18 | Web Interface AUTODOME IP starlight 7000i Auto logout time [min] Set a time frame (in minutes) for the automatic logout. Default value is 0 (no automatic logout). Show alarm inputs Select this checkbox if you want the alarm inputs to appear in the Digital I/O section of the Live page.

  • Page 19: Camera

    AUTODOME IP starlight 7000i Camera | en Camera Installer Menu Sensor mode The sensor mode specifies the base resolution and frame rates for the image quality settings. Fast moving scenes use more frame rates (50 fps or 60 fps) for better image quality than slow moving scenes.

  • Page 20: Positioning

    | Camera AUTODOME IP starlight 7000i 5.1.1 Positioning The Positioning feature describes the location of the camera and the perspective in the camera’s field of view. Perspective information is essential to Video Analytics, as it enables the system to compensate for the illusory smallness of distant objects.
  • Page 21 AUTODOME IP starlight 7000i Camera | en Notice! The Sketch functionality is only available for configured and assigned pre-positions. For AUTODOME and MIC cameras, configure the pre-positions of the camera and assign the pre-positions to one of the available 16 VCA profiles before calibration with Sketch.
  • Page 22 | Camera AUTODOME IP starlight 7000i – Enter the real size of a line or angle. To do this, select the line or angle, then enter the size in the corresponding box. Example: You have placed a line on ground across the lower side of an automobile.

  • Page 23: Scene Mode

    AUTODOME IP starlight 7000i Camera | en Latitude Latitude is the north-south position of the camera in the spherical coordinate system WGS 84. Longitude Longitude is the east-west position of the camera in the spherical coordinate system WGS 84. Ground level [m] The elevation of the ground above sea level.

  • Page 24: Picture Settings

    | Camera AUTODOME IP starlight 7000i Restore mode defaults Click Restore Mode Defaults to restore the factory default modes. Confirm you decision. 5.2.1 Picture Settings Color White Balance Adjusts the color settings to maintain the quality of the white areas of the image.

  • Page 25: Enhance

    AUTODOME IP starlight 7000i Camera | en If you select this option, the camera disables Shutter automatically. Shutter Adjusts the electronic shutter speed (AES). Controls the time period for which light is gathered by the collecting device. The default setting is 1x (60 Hz: 1/30, 50 Hz: 1/25) Maximum automatic exposure Use this field to limit the integration time when Frame Integration is active.
  • Page 26 | Camera AUTODOME IP starlight 7000i High dynamic range The High dynamic range mode uses an electronic shutter to capture multiple images with different exposure times and to reproduce a high-contrast frame. The output frame combines the bright area captured by the high-speed shutter image and the dark area captured by the low-speed shutter image.

  • Page 27: Scene Mode Scheduler

    AUTODOME IP starlight 7000i Camera | en Noise reduction Turns on/off the 2D and 3D noise reduction If you select Auto, the camera will adjust the 2D and 3D noise reduction level automatically. 2D noise reduction level This field operates in conjunction with the field Noise reduction to reduce the noise introduced by the brightness of the image.
  • Page 28 | Camera AUTODOME IP starlight 7000i Profile name Profile number Default Profile name Description Profile 1 HD Image Optimized For an HD image, the video bit rate and frame quality are adjusted to ensure that the picture quality is the priority.
  • Page 29 AUTODOME IP starlight 7000i Camera | en Averaging period Select the appropriate averaging period as a means of stabilizing the long term bit rate. Target bit rate To optimize use of the bandwidth in the network, limit the data rate for the device. The target data rate should be set according to the desired picture quality for typical scenes with no excessive motion.

  • Page 30: Encoder Streams

    | Camera AUTODOME IP starlight 7000i I/P-frame delta QP This parameter sets the ratio of the I-frame quantization (QP) to the P-frame quantization (QP). For example, you can set a lower value for I-frames by moving the slide control to a negative value.

  • Page 31: Encoder Statistics

    AUTODOME IP starlight 7000i Camera | en Profile number Default Profile name Description Profile 3 HD Bit Rate For an HD image, the video bit rate and frame Optimized quality are adjusted to ensure that the bit rate is the priority.

  • Page 32: Privacy Masks

    | Camera AUTODOME IP starlight 7000i Less important parts (such as the sky and trees in the background, all identified as backgrounds in the GUI) are encoded at lower quality and therefore have a decreased encoding quality. Eight encoder regions can be defined.

  • Page 33: Lens Settings

    AUTODOME IP starlight 7000i Camera | en – To amend the shape of a zone, place the cursor over the edge of the zone, hold down the mouse button and drag the edge of the zone to the required position.

  • Page 34: Ptz Settings

    | Camera AUTODOME IP starlight 7000i Iris Auto iris Automatically adjusts the lens to allow the correct illumination of the camera sensor. This type of lens is recommended for use where there are low light or changing light conditions.
  • Page 35 AUTODOME IP starlight 7000i Camera | en Freeze frame Select On to freeze the image while the camera moves to a predetermined scene position. Azimuth Select On to display azimuth/elevation readings. Select Off to hide azimuth/elevation readings. Maximum pan speed [%] Select the maximum pan speed (in percent).

  • Page 36: Pre-Positions And Tours

    SW, W, NW) heading in which the camera is pointing. Notice! The compass feature is not compatible with Bosch’s Intelligent Tracking feature. If Intelligent Tracking is activated, the camera automatically disables the display of the compass heading. Once Intelligent Tracking is deactivated, the camera returns the compass heading to the display.

  • Page 37: Pre-Position Settings

    AUTODOME IP starlight 7000i Camera | en To define a Custom tour Create the individual pre-positions. To add a pre-position into the custom tour, select the pre-position from the general list and click the triangle button to copy it to the custom tour list.

  • Page 38: Pre-Position Mapping

    5.12 Pre-position mapping Pre-position mapping allows you to map a function to a pre-position action. This feature works for Bosch protocols and for non-Bosch protocols. Action Select the appropriate action: Show or Set. Pre-position Enter the number of the pre-position to map.

  • Page 39: Sectors

    AUTODOME IP starlight 7000i Camera | en Gamma mode on 5.13 Sectors To define a title for sectors: Place the cursor in the input box to the right of the sector number. Type a title for the sector, up to 20 characters long.

  • Page 40: Recording

    The Storage overview field displays the local media. Note: The recording performance of the SD card depends on the speed (class) and the performance of the SD card. Bosch recommends an SD card of Class 6 or higher. 2020-07 | v0.7 |...

  • Page 41: Activating And Configuring Storage Media

    AUTODOME IP starlight 7000i Recording | en Note: For more information about Automatic Network Replenishment (ANR), refer to the White Paper “ANR 2.0 Automatic Network Replenishment (ANR),” available on the product page for your camera. Access the product page on the online product catalog from http:// www.boschsecurity.com/corporate/product-catalog/index.html.
  • Page 42 | Recording AUTODOME IP starlight 7000i Stream profile settings Select the encoder profile setting that is to be used with stream 1 and 2 when recording. This selection is independent of the selection for live stream transmission. (The properties of the encoder profiles are defined on the Encoder Profile page.)

  • Page 43: Maximum Retention Time

    AUTODOME IP starlight 7000i Recording | en If the target has not yet been defined, click Configure accounts to jump to the Accounts page where the server information can be entered. Alarm triggers * Select the alarm type that is to trigger an alarm recording: –...

  • Page 44: Recording Status

    | Recording AUTODOME IP starlight 7000i Click the date you wish to delete. Click OK. The item will be deleted from the table and the window will close. The process must be repeated for deleting additional days. Time periods You can change the names of the recording profiles.
  • Page 45 AUTODOME IP starlight 7000i Recording | en VCA overlays To include VCA overlays in the email, select this check box. Posting interval Enter the interval in seconds at which the images are sent to an FTP server. Enter zero for no images to be sent.

  • Page 46: Alarm

    | Alarm AUTODOME IP starlight 7000i Alarm Alarm Connections You can select how the camera responds to an alarm. In the event of an alarm, the unit can automatically connect to a pre-defined IP address. You can enter up to ten IP addresses to which the camera will connect in sequence in the event of an alarm, until a connection is made.
  • Page 47 AUTODOME IP starlight 7000i Alarm | en Remote port Depending on the network configuration, select a browser port here. The ports for HTTPS connections will be available only if the On option is selected in the SSL encryption parameter. Video output If you know which unit is being used as the receiver, you can select the analog video output to which the signal should be switched.

  • Page 48: Video Content Analysis (Vca)

    | Alarm AUTODOME IP starlight 7000i Video Content Analysis (VCA) Note: This section of the manual provides an overview of the fields and the options for each field on the page VCA. This section is not a complete tutorial of setting up VCA. For more information, refer to the separate manual Video Content Analysis (VCA), available on the product page for Intelligent Video Analytics.

  • Page 49: Virtual Masks

    AUTODOME IP starlight 7000i Alarm | en Tamper detection Detect tampering of cameras and video cables by means of various options. Run a series of tests at different times of the day and night to ensure that the video sensor is operating as intended.

  • Page 50: Audio Alarm

    | Alarm AUTODOME IP starlight 7000i 3. Click Enabled to enable the virtual mask. The rectangle that represents the mask in the preview window becomes red. The text “Virtual Masks: ENABLED” appears in the View Control window. To disable virtual masks: Click the Disable masks checkbox.

  • Page 51: Alarm Inputs

    AUTODOME IP starlight 7000i Alarm | en SMTP password Enter the required password for the registered user name here. Format You can select the data format of the alarm message. – Standard (with JPEG) E-mail with attached JPEG image file.

  • Page 52: Alarm Outputs

    | Alarm AUTODOME IP starlight 7000i Name You can enter a name for each alarm input. If the Live functions are configured accordingly, this name is displayed below the icon for the alarm input. You can also use the name in the Forensic Search program function as a filter option for quick search in recordings.

  • Page 53: Alarm Rules

    AUTODOME IP starlight 7000i Alarm | en Click Examples under the Alarm Task Editor field to see some script examples. A new window opens. Enter new scripts in the Alarm Task Editor field or change existing scripts in line with your requirements.

  • Page 54: Network

    | Network AUTODOME IP starlight 7000i Network Network Services This page shows an overview of all available network services. Use the checkbox to activate or deactivate a network service. Click on the settings symbol next to the network service to go to the settings page for this network service.
  • Page 55 AUTODOME IP starlight 7000i Network | en UDP encryption Enable this option to encrypt the User Datagram Protocol (UDP) connection. UDP with encryption can also be used in multicast networks. TCP rate control Select On if you want to allow Adaptive Bit Rate encoding.

  • Page 56: Dyndns

    This field identifies any cloud-based services with which the camera communicates. – If you have registered the device on a cloud-based service such as Bosch Remote Portal, then this field identifies this fact (“Registered on Bosch Remote Portal”). Note: The button (Connect to Bosch Remote Portal) to connect to the device with that service is active.
  • Page 57 AUTODOME IP starlight 7000i Network | en Note: The button (Connect to Bosch Remote Portal) to connect to the device with that service is not active. Stratocast Enter the Stratocast Registration code to connect with the Genetec’s Stratocast cloud. Click Register to activate the account.

  • Page 58: Network Management

    | Network AUTODOME IP starlight 7000i Requested total The value in this field is the total number of watts from the fields Requested for camera and Additional Power. Allocated power The value in this field is the number of watts of allocated power to the camera.

  • Page 59: Accounts

    AUTODOME IP starlight 7000i Network | en Multicast operation requires a multicast-enabled network that uses UDP and the Internet Group Management protocol (IGMP V2). The network must support group IP addresses. Other group management protocols are not supported. The TCP protocol does not support multicast connections.

  • Page 60: Ipv4 Filter

    | Network AUTODOME IP starlight 7000i Login Enter the login ID for the server. Password Enter the password that gives you access to the server. To verify the password, click the Check button to the right. Path Enter the exact path on which you wish to post the images on the server. To browse for the correct path, click the Browse button to the right.

  • Page 61: Service

    AUTODOME IP starlight 7000i Service | en Service Maintenance Update server The address of the update server appears in the address box. Click Check to make a connection to this server. Select the appropriate version for your camera to download the firmware from the server.

  • Page 62: Certificates

    | Service AUTODOME IP starlight 7000i Certificates Add a certificate/file to the file list Click Add. In the Add certificate window choose either: – Upload certificate to select a file that is already available: – Click Browse to navigate to the required file.

  • Page 63: Operation Via The Browser

    AUTODOME IP starlight 7000i Operation via the browser | en Operation via the browser 10.1 Live page 10.1.1 Connection Stream 1 Select this option to display stream 1 of the camera. Stream 2 Select this option to display stream 2 of the camera.
  • Page 64 | Operation via the browser AUTODOME IP starlight 7000i Note: If the pre-position is already stored, a dialog box displays the message, “Overwrite current pre-position?” Click OK to overwrite, or click Cancel to cancel the operation. Click to display the selected pre-position in the video image.

  • Page 65: Aux Control

    AUTODOME IP starlight 7000i Operation via the browser | en 10.1.4 AUX Control With the tab AUX Control you can enter pre-programmed keyboard control commands. These commands are composed of a command number plus the appropriate function key (Show pre- position, Set pre-position, AUX on, or AUX off).

  • Page 66: Recording Status

    | Operation via the browser AUTODOME IP starlight 7000i 10.1.7 Recording status The hard drive icon below the live camera image changes during an automatic recording. The icon lights up and displays a moving graphic to indicate a running recording. If no recording is taking place, a static icon is displayed.

  • Page 67: Status Icons

    AUTODOME IP starlight 7000i Operation via the browser | en 10.1.13 Status icons Various overlays in the video image provide important status information. The overlays provide the following information: Decoding error The frame might show artifacts due to decoding errors.

  • Page 68: Playback

    | Operation via the browser AUTODOME IP starlight 7000i 10.2 Playback 10.2.1 Selecting the recording stream On the left side of the browser, expand the Connection group if necessary. To view a recording stream: Click the Recording drop-down arrow to see the options.
  • Page 69 AUTODOME IP starlight 7000i Operation via the browser | en – Connection Status – Services You can also download a .JSON file with information about the device: At the bottom of the page, locate the Export button Click the Export button...

  • Page 70: Using Your Autodome Camera

    | Using your AUTODOME camera AUTODOME IP starlight 7000i Using your AUTODOME camera 11.1 Using Intelligent Tracking To activate the Intelligent Tracking feature, one of the following conditions must be met: – The Silent IVA option must be selected in the VCA page on the Settings tab. Refer to Video Content Analysis (VCA), page 48 .
  • Page 71 AUTODOME IP starlight 7000i Using your AUTODOME camera | en White eye, flashing Intelligent Tracking is actively following a target. Gray eye with a red “X” Intelligent Tracking lost the selected target and will wait for the target to reappear using the last known trajectory.

  • Page 72: Recommended Use Of Your Camera

    | Using your AUTODOME camera AUTODOME IP starlight 7000i 11.2 Recommended Use of Your Camera 2020-07 | v0.7 | User Manual Bosch Security Systems...

  • Page 73: Troubleshooting

    AUTODOME IP starlight 7000i Troubleshooting | en Troubleshooting If you experience difficulties operating your AUTODOME camera, refer to the following. If the guidelines do not enable you to solve the problem, contact an authorized technician. Problem Questions to Ask/Actions to Resolve the Problem...

  • Page 74: Physical Reset Button

    | Troubleshooting AUTODOME IP starlight 7000i Problem Questions to Ask/Actions to Resolve the Problem If OK, then: – Check that the maximum Ethernet cable distance has not been exceeded. If OK, then: – Restore all camera settings via the Settings menu.
  • Page 75 AUTODOME IP starlight 7000i Troubleshooting | en Notice! A factory default deletes all camera settings including passwords, network settings, and image settings. Complete the following sequence of steps only if you have no other option to restore operation to the camera.

  • Page 76: Status Codes

    | Status Codes AUTODOME IP starlight 7000i Status Codes Most status codes appear on the OSD until you acknowledge them. The codes identified with asterisks (**) appear for approximately 10 seconds, then disappear automatically. Status Description Recommended action Code...
  • Page 77 2. Verify the integrity/tightness of the external fasteners. Tighten where necessary. 3. If obvious damage is present, stop using the camera and contact the nearest Bosch Security Systems Service Center. 4. If no damage is evident, power the camera off and then on, and then evaluate operational performance.
  • Page 78 | Status Codes AUTODOME IP starlight 7000i Status Description Recommended action Code (to be completed by a qualified Service Technician) position, heat generated by the camera will help to melt ice buildup from its front faceplate area.) 3. If the obstruction is from extreme ice...
  • Page 79 Code (to be completed by a qualified Service Technician) IP fusion 9000i). If the log notes heater or defroster failure, contact the nearest Bosch Security Systems Service Center. 3. If operation is obstructed because of excessive ice buildup, temporarily avoid...
  • Page 80 | Status Codes AUTODOME IP starlight 7000i Caution! If you choose not to use a switch or midspan with the appropriate Power Sourcing Equipment (PSE) chip, then the camera will not recognize the PoE as compliant, and the camera firmware may disable some or all functionality.

  • Page 81: Aux Commands

    AUTODOME IP starlight 7000i AUX Commands | en AUX Commands Function Command Description On/Off Auto Pan without limits (Continuous) On/Off Auto Pan between limits On/Off Run Custom Pre-Position Tour On/Off Run Pre-Position Tour On/Off AutoPivot Enable On/Off Backlight Compensation (BLC)
  • Page 82 | AUX Commands AUTODOME IP starlight 7000i Function Command Description On/Off Wiper On/Off (Intermittent) On/Off Wiper On/Off (One shot) On/Off Wash/Wipe On/Off On/Off Left Hard Pan Limit On/Off Right Hard Pan Limit On/Off Clear Hard Pan Limits On/Off Power Mode...

  • Page 83: Support

    – Troubleshooting – Repair & Exchange – Product Security Bosch Building Technologies Academy Visit the Bosch Building Technologies Academy website and have access to training courses, video tutorials and documents: https://www.boschsecurity.com/xc/en/support/training/ Bosch Security Systems User Manual 2020-07 | v0.7 |...
  • Page 84 | Support AUTODOME IP starlight 7000i 2020-07 | v0.7 | User Manual Bosch Security Systems...
  • Page 86 Bosch Security Systems B.V. Torenallee 49 5617 BA Eindhoven Netherlands www.boschsecurity.com © Bosch Security Systems B.V., 2020...

This manual is also suitable for:

Ndp‑7512‑z30Ndp‑7512‑z30cNdp‑7512‑z30ctNdp‑7512‑z30kAutodome inteox 7000i

Table of Contents