2.
If the issue persists after rebooting, contact your HP service representative.
0035-0013-0386 Feeding system - Transport from aspiration
Timeout
Low flow rate from aspiration detected; the manual aspiration hose could be dirty or blocked.
1.
Move the hose away from powder for a few seconds.
2.
Cover and uncover the hose inlet repeatedly with your hand and shake the hose in order to unclog
any material.
3.
Check if the filters are full of powder. Clean the filters if required or replace them if HEPA is
compromised.
4.
If the issue persists after rebooting, contact your HP service representative.
0048-0004-0005 Sieve - Deposit Sieve Timeout
The unit fails to dispense. The seive may be clogged.
1.
Clean the sieve manually; see
2.
If the issue persists after rebooting, contact your HP service representative.
0081-0002-0105BU Interface - Door interlock (QSA201) Timeout
The door interlock could not be unlocked.
1.
Push slow and hard on the handle area to compress the gasket or push gently and use your knee or
foot to check it is pressed.
2.
If the issue persists after rebooting, contact your HP service representative.
108
Chapter 7 System errors
{Xref Error! Target does not
exist.}.