Table of Contents
Advertisement
Prepare for replacement
Always follow the steps of the procedure in the order presented.
1.
Ensure that the Load station is shut down.
2.
To replace the vacuum system HEPA filter you need the 5S376A - HP Metal Jet Powder Vac. H.E.P.A.
Filter provided in the yearly maintenance kit.
3.
You are recommended to wear safety goggles, gloves, a safety mask, and safety boots. The area is
marked with warning symbols.
WARNING!
personal injury or damage to the product.
Replace the HEPA filter
1.
Locate the old vacuum system HEPA filter.
96
Chapter 4 Maintenance
Failure to follow the guidelines marked with warning symbols could result in serious
Advertisement
Table of Contents
Troubleshooting
