Table of Contents
Advertisement
5
Customer Self-Repair
The HP Customer Self-Repair program offers our customers the fastest service under either warranty
or contract. It enables HP to ship replacement parts directly to you (the end user) so that you can
replace them. Using this program, you can replace parts at your own convenience.
Convenient and easy to use
●
Your service representative will diagnose and assess whether a replacement part is required to
address a defective hardware component.
For more information about Customer Self Repair, see the HP website at the following link:
http://www.hp.com/go/selfrepair/.
Replace the manual powder intake hose
Always follow the steps of the procedure in the order presented.
IMPORTANT:
●
Pay attention to the assembly sequence.
●
Wear appropriate personal protective equipment (PPE) when handling powder (i.e. latching and
unlatching the valve). Refer to the Safety Data Sheet of the powder being processed and meet
local regulations.
●
Before starting the procedure, complete aspiration cycles through this hose to remove any
remaining powder inside the hose that could cause a spillage.
●
A wrong sequence could result in a weak assembly, and therefore exposure to the inner powder.
102
Chapter 5 Customer Self-Repair
Safety warnings
Advertisement
Table of Contents
Troubleshooting
