Connecting To The Target System - HP 10312D Operating Manual

Connecting to
the Target
System
Analyzing the Intel 80286
1-6
The interface cable microprocessor connector
will
connect directly to a
PGA socket on the target system or, with the adapter supplied, connect
to an LCC style socket.
PROTECT AGAINST STATIC DISCHARGE
The interface module contains devices that are susceptible to
damage by Electrostatic Discharge (ESD ). Therefore,
precautionary measures should be taken before handling the
microprocessor connector attached to the end
of
the interface
cable in order to avoid damaging the internal components of
the interface module with static electricity.
Do not install the microprocessor connector of the interface
module in the target microprocessor socket when power is
applied to the target system. The interface module may be
damaged
if
power is not removed from the target system prior
to installation.