HP Metal Jet S100 User Manual page 55

● Fast dosing: The dispensing frequency when high mass flow is required in the initial filling of the
refiller. The parameter itself represents the time between each 180° rotation of the rotary valve.
● Leveling time: The target time in the leveling operation to ensure that powder is correctly leveled in
the build-unit feeding platforms.
● Rotatory direction change time: The time between the rotation-direction changes of the refiller
motor. Changing it may improve the results of the leveling operation.
● Refiller vibration time: The vibration time of the refiller required to clean it.
For feeding manually (vacuum hose)
Follow one of two paths to view or edit the recipe.
Access through 'Feed from container'
1. From the left menu of the front panel, select the production icon
2. Under Feed manual properties, tap Feed recipe.
3. Edit the values of the recipe as desired. See the summary of the editable parameters below.
Which parameters you can edit depend on the permissions associated with your profile type.
4. Tap Apply.
Access through the settings menu
1. From the left menu of the front panel, select the settings icon
then the recipe that you want to view or edit.
2. Edit the values of the recipe as desired. See the summary of the editable parameters below.
Which parameters you can edit depend on the permissions associated with your profile type.
3. Tap Apply.
Editable parameters
● Mixer speed: The speed of the mixer. This speed is intended specifically for a mixing process, unlike
in the Load BU workflow, which is only to assist in the extraction of powder.
, then tap Feed from container.
, then tap Utilities > Recipes, and
For feeding manually (vacuum hose) 51