Editing Block Properties - Siemens SINUMERIK 840D sl Operating Manual
Hide thumbs
Also See for SINUMERIK 840D sl:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
16.11
Editing block properties
You can edit the title, author and comments of an INT block.
Note
You cannot edit the block name, interrupt number and data class assignment.
Procedure
Universal
Operating Manual, 03/2013, 6FC5398-6AP40-3BA1
3.
Press the "Add" softkey.
The "Properties" window appears.
4.
Enter the name of the author, number of the INT block and, if required,
a comment.
The data class of the block is specified.
5.
Press the "OK" softkey to transfer the block to the list.
1.
The ladder diagram display is opened.
2.
Select the relevant block and press the "Program block" softkey.
3.
Press the "Properties" softkey.
The "Properties" window appears.
Ladder Viewer and Ladder add-on (828D only)
16.11 Editing block properties
331
Advertisement
Table of Contents
