Specific Search In The Tool Management Lists - Siemens SINUMERIK 840D sl Operating Manual

Tool management

8.11 Specific search in the tool management lists

Procedure
...
...
8.11 Specific search in the tool management lists
There is a search function in all tool management lists, where you can search for the
following objects:
● Tools
– You enter a tool name. You can narrow down your search by entering a replacement
– Enter the D number and, if necessary, activate the "Active D number" checkbox.
● Magazine locations or magazines
If only one magazine is configured, then the search is only made for the magazine
location.
If several magazines are configured, then it is possible to search a specific magazine
location in a specific magazine or just to search in a specific magazine.
● Empty locations
If the lists with the location type are used, then the empty location search is made using
the location type and location size.
216
1. Select the "Parameter" operating area.
2. Press the "Tool list", "Tool wear" or "Magazine" softkey.
3. Press the ">>" and "Filter" softkeys.
The "Filter" window opens.
4. Activate the required filter criterion and press the "OK" softkey.
The tools that correspond to the selection criteria are displayed in the
list.
The active filter is displayed in the window header.
tool number.
You have the option of only entering a part of the name as search term.
Operating Manual, 03/2013, 6FC5398-6AP40-3BA1
Universal