Procedure
...
...
Universal
Operating Manual, 03/2013, 6FC5398-6AP40-3BA1
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1.
Select the "Parameter" operating area.
2.
Press the "Tool list", "Tool wear" or "Magazine" softkey.
3.
Press the ">>" and "Search" softkeys.
4.
Press the "Tool" softkey if you wish to search for a specific tool.
- OR -
Press the "Magazine location" softkey if you wish to search for a
specific magazine location or a specific magazine.
- OR -
Press the "Empty location" softkey if you wish to search for a specific
empty location.
8.11 Specific search in the tool management lists
Tool management
217